• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Priming fuel pump for R6602

Nicholas

New member
22
1
0
Location
SE South Dakota
On my gas powered M52 the fuel pump has a lever to prime the fuel pump and push fuel up to the carb(Not the primer pump to push fuel into the manifold). Was there a kit to do this from the cab. It is very difficult to get to, and with not running it but every month means a lot of cranking until the engine fires.
Thanks
 

majortom

New member
132
21
0
Location
Aniwa, Wisconsin
the only time you need to use that lever is when you run out of gas. i had a truck that did that, the check valve inthe fuel pump was bad. rebuild or replace your pump.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks