• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Project Ferro Navy M37

swiss

Well-known member
Steel Soldiers Supporter
2,725
833
113
Location
Oakwood, Ga
I'm not going for a Seabee truck. The regular Navy did have M37's that were used on bases or assigned to ships.

I am going to have the US with the anchor in the middle made into 16in stencils for the doors. This is a US Navy tribute truck, not an actual restoration. Besides, all the research I have done, the Navy would paint the truck whatever the guy painting it wanted to paint it. There were no books or TM's the Navy put out with standard paint and stencils for vehicles like the Army did. So whatever you want, is actually correct!
View attachment 510996
where is the United States Air Force insignia?
 

maddawg308

Well-known member
Steel Soldiers Supporter
10,864
750
113
Location
Appomattox, VA
zout's doing such a great job, the next time I need an MV redone, I'm tempted to send it down to him to get the royal treatment!
 

zout

In Memorial
In Memorial
7,744
154
63
Location
Columbus Georgia
Just so you fellas can go to bed peaceful tonight I at least got something done on the 37. It was 113 in the garage with 3 fans on me and it felt like I was in a Betty Crocker Microwave oven - but overcame all odds.

Got the grille back on - cleaned up the back lenses and yes the hitch is coming off and all the frame paint will get touched back up when done - you guys are a tough crowd to keep content.
Got the uprights laid out and the cross bar - you can see all the rivets someone placed in it - my guess to hold cheap plastic sheeting so they had cover - ???? who knows but they are all getting removed once blasted.DSCN0566.jpgDSCN0567.jpgDSCN0568.jpgDSCN0569.jpgDSCN0570.jpgDSCN0571.jpg
 

o1951

Active member
899
155
43
Location
Bergen County, NJ
who knows but they are all getting removed once blasted.

Question for the expert - would it be easier to remove the rivets before blasting? Then the rivets heads will not shield the crossbar.
 

zout

In Memorial
In Memorial
7,744
154
63
Location
Columbus Georgia
Dang - after all this I feel honored to make some what of an impression for someone to do better on their project.

RIVETS - either way BRO - I will sand blast down - clean up - fill holes - primer and paint. No reason to waste material just chasing rivets when all the surface has to get to OEM anyhow. Then just fill in the holed as they are cheap o pop rivets. Then again - I could drill out over more than 150 pop rivets - then fill but the end will all be the same.

Something is funny about this paint on the surface = will have to put my finger on it and see what is going on. Hopefully after the weekend I will know more. AND NO it has nothing to do with its color as putrid as it is.:)
 

hndrsonj

Senior Chief/Moderator
Super Moderator
Steel Soldiers Supporter
7,584
363
83
Location
Cheyenne, WY
Got the uprights laid out and the cross bar - you can see all the rivets someone placed in it - my guess to hold cheap plastic sheeting so they had cover - ????
Both the M48 and M59 had sheet metal wrapped and welded over a soft top frame. (They prolly didn't have a welder-my guess)
 

swiss

Well-known member
Steel Soldiers Supporter
2,725
833
113
Location
Oakwood, Ga
Hmmm...let's see if I remember most of the military vehicle projects:

2 - M38A1's (zout-2 and Dinger)
1 - M43 Ambulance (zout)
2 - M109 Campers (zout and Dinger)
1 - M909 Camper (zout)
1 - M923 (swiss)
1 - CUCV (swiss)
1 - M101A2 trailer(swiss)
1 - WC-22 (PB)
1 - K18-C (PB)
1 - M37
(Ferro)

Did I miss any??
YES:

M909 ATC Trailer, remember you gave it to him !
 

zout

In Memorial
In Memorial
7,744
154
63
Location
Columbus Georgia
Ah yes - the M909 ATC how could PaPaBear forget :deadhorse:

Got the stencils delivered this morning - going to try to finalize one of them which looks dis-proportionate in a lage size - we'll see. Also trying to narrow down the door stencil logo.

If it seems like this is going slower than normal it is - just lots of stuff happening on this end that I have no control over so hang in there.
 

zout

In Memorial
In Memorial
7,744
154
63
Location
Columbus Georgia
Since 7/14/14 till 8/22/14 there has been 181.5128205 views per day on my mumbo jumbo - :not worthy:thanks ya all I appreciate it good or bad.
 

Whiterabbit

Member
744
14
18
Location
Bristol Va.
I just want to know who viewed this thread only .5128205 times??
Is that just a sideways glance? :shrugs:

That truck is looking good! Too bad it'll look like it's in primer waiting for it's US ARMY OD paint! :whistle:
 

rickf

Well-known member
Steel Soldiers Supporter
3,124
1,615
113
Location
Pemberton, N.J.
I just want to know who viewed this thread only .5128205 times??
Is that just a sideways glance? :shrugs:

That truck is looking good! Too bad it'll look like it's in primer waiting for it's US ARMY OD paint! :whistle:
At the rate it is going he just may make it to Virginia. Bring a case of OD buzz bombs.:twisted::twisted::twisted: We will drag him out of the water yet.:lol::lol:
 

EMD567

Driver for the Ga Mafia
Steel Soldiers Supporter
2,117
47
48
Location
Aiken SC
All it needs now is a prop sticking out of the rear, making it a mini dukw..........
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks