Project time again at Zouts

[papabear]

The pictures do not do the work justice...trust me.

 

[marchplumber]

Curious Commander.................I know you have vast knowledge of MANY things, yet,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,there are a TON of small pieces parts missing and needing fabrication on the job. How do you "know" what they look like and their dimensions? The mighty TM's? Or photos from past and existing sister vehicles........................I mean, from seats to hold downs, you're making a TON of stuff. How do ya know what it looks like? and what parts go where? and what to make the parts out of? I know, a bunch of questions, but us darn "couch taters" are a curious bunch! LOL

Great work, I might add! %hanks for the thread!!!

 

[73m819]

Curious Commander.................I know you have vast knowledge of MANY things, yet,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,there are a TON of small pieces parts missing and needing fabrication on the job. How do you "know" what they look like and their dimensions? The mighty TM's? Or photos from past and existing sister vehicles........................I mean, from seats to hold downs, you're making a TON of stuff. How do ya know what it looks like? and what parts go where? and what to make the parts out of? I know, a bunch of questions, but us darn "couch taters" are a curious bunch! LOL

Great work, I might add! %hanks for the thread!!!

He RESEARCHES

 

[jasonjc]

Thanks for all the pic's I've got to make all that stuff too.

 

[marchplumber]

He RESEARCHES

LOL, that's definitive. LOL

 

[zout]

March...I keep telling folks that come over that any MV truvk I work on talks to me...hope that makes sence.
Not many pictures to go by that are not cobbled up to be realistic enough.
Never ever have I viewed a TM for components.
Us ole timers come from the industrial/mechanical era...so looking and seeing what makes sence then fabricate it.

What to make it out if...good question.
I have lots of metal of different qualities and some better than OEM... so the choice is not hard plus that I have available as far as tooling to make them. I have far less machines than I did say 20 years ago for sure because of all the moving...$$$...and space available to have them. Just do the best you can with what you have.
THEN...let the vehicle talk to you.
I appreciate the compliments...but If anything I hope the pics alone allows someone else to be able to work on their stuff.

Remember..What I build is a honor to those that served in them...not an anal showpiece that does not look real...they are battle worn.

 

[Another Ahab]

Just do the best you can with what you have.
THEN...let the vehicle talk to you.
I appreciate the compliments...but If anything I hope the pics alone allows someone else to be able to work on their stuff.

Remember..What I build is a honor to those that served in them...not an anal showpiece that does not look real...they are battle worn.

Commander Z is a rarity even among a rare breed:

- He is both an MV Rat, AND...

- An MV Whisperer!

 

[zout]

Got ign wired in...have new condenser and points ordered and will be at the parts shop tomorrow...will get them in after doctors appointments...engine rolls over fine and great compression and fuel to cyl's.
Whoooooo Hooooo

 

[zout]

Engine fired up after a very long time. It like Frankenstein ITS ALIVE ITS ALIVE
TWM nominated it on MV of the Month poll..BE SURE TO VOTE FOR IT IF YOU LIKE IT.
THANKS

 

[o1951]

and SOUND. I wanna hear that 4 banger.

 

[Tinwoodsman]

Okay!

 

[papabear]

Hmmm....running/driving/stopping now eh??

Looks like MV of the month material to me!!

 

[zout]

Exhaust system ordered this morning along with new clutch return spring. Will get the new windshield glass cut next and Zout2 will assist in handling with my glass suction cups and rope.
Going to clean out the cooling system in the morning and get in antifreeze.
Only a couple small things to finish up on and it goes into Doc's hands again.
Here are a few current pics.

 

[zout]

 

[Another Ahab]

What's going on with the IV drip to the block:

- Treating a little "congestion" at the carburetor?!

 

[swiss]

What's going on with the IV drip to the block:

- Treating a little "congestion" at the carburetor?!


View attachment 648440

Beer Bong Storage between coats of paint is my guess.

 

[marchplumber]

Maybe, but it could be C.R. too,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,so many choices.

Looks purdy darn Sa-weet if you ask me. You are a talented man, Commander.

 

[Another Ahab]

Beer Bong Storage between coats of paint is my guess.

Maybe, but it could be C.R. too,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,so many choices.

Might be time to join the Flavor-of-the-Month Club.

 

[zout]

Ahab...Doc is working on putting it into museums...no fuel or vapor can be in the tank...therefore just running it off an IV for now...but we'll know its right.

March....thank you sir...your appreciation is appreciated. Its only an honor for those that might have served in it or might have been a patient hauled in one...its for them and not an anal showpiece.

Here in a couple weeks there will be over 1,00 high school kids that will see it and talk to Doc who served in one to hear its history....he has everything medical to set it up like it was in the battlefield. Very cool listening to his stories.

 

[jasonjc]

Here in a couple weeks there will be over 1,00 high school kids that will see it and talk to Doc who served in one to hear its history....he has everything medical to set it up like it was in the battlefield. Very cool listening to his stories.

You think Doc could make us a walk around video of the setup with all the medical stuff??? I think that would be great. And as always you have done a great job on it.