- 34,012
- 1,810
- 113
- Location
- GA Mountains
Mine may have been worse from the A3 rolling stock. Got rid of all that now!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Project time once Again
- Thread starter zout
- Start date
- 7,744
- 154
- 63
- Location
- Columbus Georgia
There wil be some "tongue" weight on it - Ron will be drooling to get his hands on it and use it 
After looking at it last night once the first hit of Crown wore off I sort of laid out the spare to hang as close to the axle as possible without infringing on its movement.
Also I have some 2 1/2 in wide aluminum C channel to make a slider rail for his board - great suggestion from Tigger as well for SWISS to put some type of anti slip on it. Would use the same channel then to make the water cans bottom mount to bolt to - for weight Swiss can just run with full cans.
I was looking at the frame last night to see if it could disappear - I have that BIG BBQ grille that needs to be placed on a trailer chassis (oops just gave it away)
After looking at it last night once the first hit of Crown wore off I sort of laid out the spare to hang as close to the axle as possible without infringing on its movement.
Also I have some 2 1/2 in wide aluminum C channel to make a slider rail for his board - great suggestion from Tigger as well for SWISS to put some type of anti slip on it. Would use the same channel then to make the water cans bottom mount to bolt to - for weight Swiss can just run with full cans.
I was looking at the frame last night to see if it could disappear - I have that BIG BBQ grille that needs to be placed on a trailer chassis (oops just gave it away)
- 3,923
- 76
- 48
- Location
- Comfort, Texas
Now we are getting close.
glassk
Active member
- 998
- 6
- 38
- Location
- Hampton, GA
I think I have two Chains that 
gave me off of a trailer, has eye bolts and the hooks, if that is something you can use,...
gave me off of a trailer, has eye bolts and the hooks, if that is something you can use,...
- 7,744
- 154
- 63
- Location
- Columbus Georgia
Well - gotta tell ya - my back got a workout tonight and I feel it talking to me.
NWIH that motorcycle ramp is tucking under the frame with the spare tire rack mount - the brake like is dead center of the framework an I am not changing a brake design or length.
The single board ramp COULD however get mounted to the side of the box stake racks in one shape manner or form to fit the overall design without taking you mind off the total changeover - does that make any sence
to you ??? its got me all screwed up.
Frame blasted - gotta tape off some electrical cabling before spraying tomorrow night - hardly no humidity outside and its suppose to get colder anyhow. I want to figure out that spare tire carrier before shooting anything.
Anyhow - no puny GA deer to show you - just some overall work done - there were a few sippy pops in between and some cuss words but nothing I want to stick on here.
For those who think some of us knuckleheads have this all figured out and just do it - think again. Some of this has to be thought out in the long run process - again I am confused.
NWIH that motorcycle ramp is tucking under the frame with the spare tire rack mount - the brake like is dead center of the framework an I am not changing a brake design or length.
The single board ramp COULD however get mounted to the side of the box stake racks in one shape manner or form to fit the overall design without taking you mind off the total changeover - does that make any sence
to you ??? its got me all screwed up.
Frame blasted - gotta tape off some electrical cabling before spraying tomorrow night - hardly no humidity outside and its suppose to get colder anyhow. I want to figure out that spare tire carrier before shooting anything.
Anyhow - no puny GA deer to show you - just some overall work done - there were a few sippy pops in between and some cuss words but nothing I want to stick on here.
For those who think some of us knuckleheads have this all figured out and just do it - think again. Some of this has to be thought out in the long run process - again I am confused.
- 7,744
- 154
- 63
- Location
- Columbus Georgia
as always - the camera has some hidden at the last moment
- 2,733
- 863
- 113
- Location
- Oakwood, Ga
- 7,744
- 154
- 63
- Location
- Columbus Georgia
NA - one of my sisters did a tire calendar ad - so in honor of her I just have it in the garage - now Zout 2 does not come in the garage - NOW I have to get my other two sisters to get calendar shots and I will be good for peace and
solitude in the garage.
solitude in the garage.
- 3,923
- 76
- 48
- Location
- Comfort, Texas
Looking good as usual Commander. What is up with the dual tailights? By the way, it took me three shots to get the picture of your sister right. 
- 2,733
- 863
- 113
- Location
- Oakwood, Ga
TWM. The trailer is setup for both 12 volt civy and 24 volt military.
Sweet
Sweet
- 1,918
- 19
- 38
- Location
- Bradenton, FL
I smell copyright infringement!!!
Attachments
- 2,733
- 863
- 113
- Location
- Oakwood, Ga
Yes Sir, if you remember the hurricane that me and you stood outside loading 11 tires into my trailer you clearly told me I was doing things the hard way hooking up light bars and I shall quote you:
PCTRANS
"Come here and look how you are supposed to do that"
At that point you disclosed untold secrets and made public your intellectual property thus allowing others such as myself to use and improve on the ideas. THANK YOU PETE.
Now how about getting those lights painted the right colors so that trailer looks respectable.
- 34,012
- 1,810
- 113
- Location
- GA Mountains
What is that "Mr Heater" device used for? LOL
- 2,733
- 863
- 113
- Location
- Oakwood, Ga
The heater is being converted into a jet thruster and mounted to the front to help move the trailer around when not hooked up to a vehicle.
- 7,744
- 154
- 63
- Location
- Columbus Georgia
I have a smaller one for less cold days = if Rolls Royce can build a tilt thruster engine for vertical take off I figured the BIG one can be utilized for forward thrust and the smaller one (as its a pigmy trailer anyhow) for vertical take off.
Lets see now - Count Osprey - Count Harrier ahhh lets just count instead - 1 2 3 4 - 4 3 2 1
= if Rolls Royce can build a tilt thruster engine for vertical take off I figured the BIG one can be utilized for forward thrust and the smaller one (as its a pigmy trailer anyhow) for vertical take off.Lets see now - Count Osprey - Count Harrier ahhh lets just count instead - 1 2 3 4 - 4 3 2 1
- 34,012
- 1,810
- 113
- Location
- GA Mountains
Ahh, JATO. Or is that JATM (jet assisted trailer movement).
glassk
Active member
- 998
- 6
- 38
- Location
- Hampton, GA
I put a swingdown Rubber tire on mine , came from a Liquid oxygen tank
- 2,733
- 863
- 113
- Location
- Oakwood, Ga
That is pretty cool!!
glassk
Active member
- 998
- 6
- 38
- Location
- Hampton, GA
Also made my own LED setups, the Black-outs are now Back up lights, since I pull it with a Chevy
- 7,744
- 154
- 63
- Location
- Columbus Georgia
DO not be disturbed - do not think its a ghost - the picture that is blurred is how fast the GA MAFIA member moves - speed of light.
Took the afternoon off as I was PO's and ready to blow my top - go cool off and hammer on Swiss's trailer instead - take my frustration out on it instead.
Epoxy 2k sprayed bare metal primer (yes all those pm'ing me if I did the underside all I can say is DUH).
Epoxy 2k sealed in primer.
Had the 175,000 BTU heater on and all dried nicely - got the framework sprayed in rubberized undercoating as well (yes the underside as well ya knuckleheads so do not pm me again).
Let this all dry up nicely and move onto the bed - ahhhhh that first pic is E Track - it will get chopped down - one piece to each inside floor of the bed corners to hook E Track straps into to tie stuff down.
My battery was wacked in the Miller Welder so I could not weld up the spare mount stuff - tomorrow night project after I replace the battery (Miller Renegade 180).
Few pics for those that cannot read (like Mafia folk)
Took the afternoon off as I was PO's and ready to blow my top - go cool off and hammer on Swiss's trailer instead - take my frustration out on it instead.
Epoxy 2k sprayed bare metal primer (yes all those pm'ing me if I did the underside all I can say is DUH).
Epoxy 2k sealed in primer.
Had the 175,000 BTU heater on and all dried nicely - got the framework sprayed in rubberized undercoating as well (yes the underside as well ya knuckleheads so do not pm me again).
Let this all dry up nicely and move onto the bed - ahhhhh that first pic is E Track - it will get chopped down - one piece to each inside floor of the bed corners to hook E Track straps into to tie stuff down.
My battery was wacked in the Miller Welder so I could not weld up the spare mount stuff - tomorrow night project after I replace the battery (Miller Renegade 180).
Few pics for those that cannot read (like Mafia folk)