Project time once Again

[Tinwoodsman]

When ever my wife complains about paint smell I just dab a little turpentine on the back of her shirt and tell her she is the one who smells. Be ready for a variety of reactions, some of which may be severe.

 

[pctrans]

Swiss, you wrapped 10 presents huh?? I don't know about you other guys, but UPS must have lost mine.....

 

[zout]

To dry PB's WC floorboards I cut a hole in the back of Debs oven - turned the oven on BAKE and slowly slide the boards through to dry them - must have forgotten to mention that to you.

Besides when Deb wipes me down with socks my grain stands out as well .

Two hours to let that epoxy to start hardening is nothing especially in 50 deg temps. It will self harden - just a little longer grasshopper.
So where are the "after" pics of it all dry.

 

[Tinwoodsman]

Commander, how much longer will it take etching primer or epoxy primer to dry at 60 degrees rather than 70 degrees? Will the end result be the same?

 

[swiss]

Checked on the drying results this morning. The surface has begun to harden, slighty still tackey where thick. The epoxy sealer has the same properties as an oil based varnish. I am going to need a second coat and sanding in between coats. This stuff runs as bad as varnish

 

[papabear]

Commander, how much longer will it take etching primer or epoxy primer to dry at 60 degrees rather than 70 degrees? Will the end result be the same?

59 minutes and 58 seconds if my calculations are correct.

 

[swiss]

Swiss, you wrapped 10 presents huh?? I don't know about you other guys, but UPS must have lost mine.....

Call ups they are giving out gift cards to those that had their Christmas ruined

 

[Tinwoodsman]

59 minutes and 58 seconds if my calculations are correct.

There is always one!!!

 

[swiss]

59 minutes and 58 seconds if my calculations are correct.

I would like to see those calculations to double check the math

 

[zout]

They took away my Scientist licsene years ago - I have NO frickin clue. BUT I can tell you the end results will be the same with no in-consitancy in the hardness. You can hit the right temp/humidity and you better be working fast because that stuff hardens like a rock.
UPS deliverred me something by mistake - thanks PC

 

[swiss]

Warthog and the Ga Rally guilted me into getting the trailer finished

Just put back together all the bows

 

[Tinwoodsman]

But it is not finished. I still need to paint the wood.

 

[swiss]

But it is not finished. I still need to paint the wood.

I'll get the brushes . You bring the paint

 

[Tinwoodsman]

Your bringing it to the rally right......opcorn: