hanselandgretel
Member
- 31
- 7
- 8
- Location
- Claremont, MN 55924
I need a manual for a PU 794G, 20 Kw, 120/240 Genset. Any out there? Thanks Al Hansel 507-528-2780
Last edited:
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
PU 794G manual needed
- Thread starter hanselandgretel
- Start date
- 5,368
- 3,379
- 113
- Location
- Lexington, South Carolina
The PU is simply a combination of a MEP generator and a trailer (it stands for Power Unit). What you need is the two TM's one for the 20 KW generator, and the one for the trailer it sits on.
hanselandgretel
Member
- 31
- 7
- 8
- Location
- Claremont, MN 55924
I need the generator manual, and I do not find a MEP # on it. Help!
- 5,368
- 3,379
- 113
- Location
- Lexington, South Carolina
You need to look at TM 5-6115-634-14P, which a simple Google search would have found.
hanselandgretel
Member
- 31
- 7
- 8
- Location
- Claremont, MN 55924
I found the manual
A company called Combat Index Data Store has manuals for a lot of gensets on CD, very reasonable too. Thanks for your help. Al
A company called Combat Index Data Store has manuals for a lot of gensets on CD, very reasonable too. Thanks for your help. Al
UnReconstructed
New member
- 12
- 0
- 0
- Location
- Exton, PA
The PU 794G is basically a souped up MEP-004 on a trailer. A 004 is rated for 15 KW, the 794 for 20KW.
I have one. I could not find a specific manual for the 794, but as near as I can tell the differences are really minimal. The speed (frequency) regulation is electronic, not manual, or hydraulic. I think that the 004 was so strong, that the military just tweaked it a bit and upped its power rating.
YMMV
I have one. I could not find a specific manual for the 794, but as near as I can tell the differences are really minimal. The speed (frequency) regulation is electronic, not manual, or hydraulic. I think that the 004 was so strong, that the military just tweaked it a bit and upped its power rating.
YMMV
Last edited:
- 2,868
- 27
- 48
- Location
- Delta, PA.
I just picked up one of these models today.It runs good,someone has robbed some of the switches.I want to use it for back up power for my house.I assume it will work fine for that.I would also like to get a operator manual for it.