bspellerin
New member
- 46
- 0
- 0
- Location
- Midlothian, TX
I changed my fuel pump this week and the flange screws were metric and not SAE, this surprised me, anyone have any thoughts.
Attachments
Last edited by a moderator:
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Quick question, fuel pump flange bolts
- Thread starter bspellerin
- Start date
Jeepsinker
Well-known member
- 5,399
- 456
- 83
- Location
- Dry Creek, Louisiana
They should have been a 10-32 if memory serves.
- 9,580
- 218
- 63
- Location
- Dickson,TN
They shouldn't have been metric.
Somebody may have stripped the threads and re-tapped them metric. 10-32 and M5 are awfully close to the same. 10-32 is .19" dia and M5 is .2" dia. so the M5 is roughly .010" bigger.
Somebody may have stripped the threads and re-tapped them metric. 10-32 and M5 are awfully close to the same. 10-32 is .19" dia and M5 is .2" dia. so the M5 is roughly .010" bigger.
bspellerin
New member
- 46
- 0
- 0
- Location
- Midlothian, TX
This must be the case, they threaded in perfectly. Thanks for the explanation.