• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Rear Brakes Lock Up M1028

rsrxc700

New member
14
11
3
Location
MPLS
Rear Brakes lock up on me driving in the rain, sketchy.... Have not had it happen in the dry.

Does this have something to do with the ride height proportioning valve and/or its adjustment.?

Communication shelter has been removed and will be driving this empty 99% of the time .

Should I disable it?

Thanks!
 

cucvrus

Well-known member
11,474
10,441
113
Location
Jonestown Pennsylvania
I would look at what is causing the lock up. Have you ever had the drums removed and looked at the condition of the axle seals and wheel cylinders? That is where I would start. Most time brakes lock up because of an issue with oil or improper adjustment. Could be proportioning valve issues. Check it out carefully and find the issue before you start adding to the issue. I have had that rear axle proportioning valve operational on all my pick-ups. I know GM had a bulletin for removing them. Good Luck. Oil-soaked brake lining is affected by rain and damp weather.
 

nyoffroad

Well-known member
946
692
93
Location
Rochester NY
I know it doesn't sound 'right' but oil or brake fluid does cause brakes to lock up NOT slip, I've had that argument several times. If both wheels seem to be locking the same then I would try disconnecting the ride valve and try it set at different heights, IIRC you want it tied up to simulate an empty bed.
 

87cr250r

Well-known member
1,267
1,991
113
Location
Rodeo, Ca
I know it doesn't sound 'right' but oil or brake fluid does cause brakes to lock up NOT slip, I've had that argument several times. If both wheels seem to be locking the same then I would try disconnecting the ride valve and try it set at different heights, IIRC you want it tied up to simulate an empty bed.

I second this comment. Every time I've had leaky axle seals or wheel cylinders I've had grabby brakes. In fact, my M1008 has a leaking hub seal and the shoes are nearly worn out on that side while the other side is nearly new.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks