bomar76
New member
- 355
- 0
- 0
- Location
- Marysville OH
I css
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Rear wheel bearing numbers?
- Thread starter bomar76
- Start date
red devils dude
New member
- 1,958
- 3
- 0
- Location
- Ft Campbell
here
The wheel bearing #'s are,
Timkin #'s
392
3994
3920
The races are the same so you can reverse the hub to rum 11.00-20 tires
The bearing supply companys will tell you that you can't run a 392 bearing with a 3920 race. Just ignore them That's what they al came with. I don't have the wheel bearing seal #'s yet but i do have the sizes so i just have to look them up.
The wheel bearing #'s are,
Timkin #'s
392
3994
3920
The races are the same so you can reverse the hub to rum 11.00-20 tires
The bearing supply companys will tell you that you can't run a 392 bearing with a 3920 race. Just ignore them That's what they al came with. I don't have the wheel bearing seal #'s yet but i do have the sizes so i just have to look them up.
red devils dude
New member
- 1,958
- 3
- 0
- Location
- Ft Campbell
and a little more info.
Wheel bearing, inner, front or rear part# 10945151 Timken 3994
Wheel bearing, outer, front or rear part# 10948079 Timken 392
Wheel bearing, inner, front or rear part# 10945151 Timken 3994
Wheel bearing, outer, front or rear part# 10948079 Timken 392
bomar76
New member
- 355
- 0
- 0
- Location
- Marysville OH
THANKS!!!!
Trango
Member
- 735
- 23
- 18
- Location
- Boulder, CO
You know, I was working on my trailer project this weekend, and I had just banged out the races on the SECOND and final hub (in preparation for swapping them), I stopped and looked at the races. They are the same!!!! I was like, I. am. the stupidest. person. alive. I can't believe I didn't check the first set.
bomar76
New member
- 355
- 0
- 0
- Location
- Marysville OH
Baja
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Bomar, if you find something on the seals, speak up! No one has found anything yet. I went through the CR catalog and found nothing right.
bomar76
New member
- 355
- 0
- 0
- Location
- Marysville OH
ind.
baja_power
New member
- 331
- 0
- 0
- Location
- Marysville Ohio
This is true. they spent an hour and 45 minutes cross referencing every hose they had to find a hose that was compatible with ATF, right size AND USCG approved. all just to buy 4 feet of it..
red devils dude
New member
- 1,958
- 3
- 0
- Location
- Ft Campbell
Inner seal Front axle National oil seal#'s
There is many seals that work here the difference is upgraded designs, but these #'s are all the same size.
450074,480074,410074.
I have the axle pinion shaft seal #'s in my shop i'll get those to you soon.
There is many seals that work here the difference is upgraded designs, but these #'s are all the same size.
450074,480074,410074.
I have the axle pinion shaft seal #'s in my shop i'll get those to you soon.
red devils dude
New member
- 1,958
- 3
- 0
- Location
- Ft Campbell
Ken gave me all this info so give him a shout out.
- 2,479
- 25
- 38
- Location
- Houston Texas
Kenny, I have the National # for the inner seal at home. I do know they discontuned it. I haven't been able to find the outer seal #.
- 2,479
- 25
- 38
- Location
- Houston Texas
RDD did i ever finish giving you all those crossreference #'s ?
red devils dude
New member
- 1,958
- 3
- 0
- Location
- Ft Campbell
no!!
- 2,479
- 25
- 38
- Location
- Houston Texas
RDD Sorry dude. PM me and let me know where i left off.
bomar76
New member
- 355
- 0
- 0
- Location
- Marysville OH
deleted