• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Rebuild Dodge WC 63

foxtrot

Well-known member
643
3,263
93
Location
france
Hi,
First acquisition in 2022.
Save in extremis from destruction.
This is a 1943 Dodge WC 63.
I am planning a rebuild originally.


Engine number: T223 -3551
Fram number: 820 62 387
Cab N°: 4270 -2413
Hood N°: 2208885-S










 
Last edited:

foxtrot

Well-known member
643
3,263
93
Location
france
Immediate objective,
cleared and if possible start the engine on its chassis before sandblasting.
At this level, the essential Tool is the blowtorch.




 
Last edited:

foxtrot

Well-known member
643
3,263
93
Location
france
I took down the identification numbers.

Engine number: T223 -3551
Fram number: 820 62 387
Cab N°: 4270 -2413
Hood N°: 2208885-S
 

foxtrot

Well-known member
643
3,263
93
Location
france
Hi,
END.
I would have preferred, but instead of vegetables he made deliveries to a sawmill.
Reinforcement plates were welded to the frame.
 

NDT

Well-known member
Steel Soldiers Supporter
10,458
6,530
113
Location
Camp Wood/LC, TX
Wow good job with the archeology! The yellow paint was for gas detection I believe and was only applied at certain eras of the war.
 

foxtrot

Well-known member
643
3,263
93
Location
france
Yes, a lot of patience for this result.
Correct, yellow is the gas detection color.
I think I can say that the dimension of the yellow circle is significantly larger than a WC52 and that there cannot be an outer white circle.
 

foxtrot

Well-known member
643
3,263
93
Location
france
I forgot to mention the blue gray color of the first marking applied at the factory 2 "against the second white marking repainted during the war 4".

 

foxtrot

Well-known member
643
3,263
93
Location
france
Does engine turn? Lots of openings pointed up with no cover ….
No, it does not turn, often the valves are the problems.
The truck stayed for years in a barn whose roof is collapsed. So it passed only a few years in the field.
Tomorrow, disassembly of the cylinder head.
 
Top