- 5,637
- 381
- 83
- Location
- Spring Branch, TX
And here I have a trailer mounted 002A that I can't even get $1100 for. Unfortunately I didn't have it locally when Harvey went through last year and looks like the Atlantic is quiet this year.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Recent MEP Auctions
- Thread starter USAMilRet
- Start date
- 3,806
- 5,866
- 113
- Location
- MA
If it wouldnt cost an arm and a leg to get it up here, that machine would be worth over 2500 here in new england.
boxer4luvr
New member
- 33
- 1
- 0
- Location
- NC
Just for giggles I followed that link and looked around a bit. The 8Kw diesel unit they have there shows 3.6L/hr fuel consumption at 1500rpm.
lonesouth
Active member
- 322
- 29
- 28
- Location
- Tallahassee, FL
that's right around the .1gal/kWh I've seen elsewhere for diesel generators.
Also, that is at 1800rpm, not 1500.
- 2,530
- 2,055
- 113
- Location
- Efland, NC
The 8k and 10k both use the same engine. That fuel burn doesn't suck for an engine that can do over 10kw of power.
At 50% of prime power rating (~5.5kw) the stated fuel burn is 1.7lph. That is less than a MEP802 under the same load conditions.
At 50% of prime power rating (~5.5kw) the stated fuel burn is 1.7lph. That is less than a MEP802 under the same load conditions.
boxer4luvr
New member
- 33
- 1
- 0
- Location
- NC
I'm not knocking the unit at all... and perhaps I misread the info. What I see stated for the 403D-11G is 9.3 kWm @ 1500 rev/min.
I really just wanted to see what sort of fuel consumption one would find from a brand new unit with bells and whistles and newest technology, etc.
At an entry point of ~$6500 I guess I was expecting better fuel consumption... but perhaps that's a reflection of my own ignorance. I guess the Btu factor for a gallon of diesel remains the same... or thereabouts. Their website mentions that one of the biggest influencing factors as one scales up is the cooling fan and water pump.
Thanks again for all the info guys!
I really just wanted to see what sort of fuel consumption one would find from a brand new unit with bells and whistles and newest technology, etc.
At an entry point of ~$6500 I guess I was expecting better fuel consumption... but perhaps that's a reflection of my own ignorance. I guess the Btu factor for a gallon of diesel remains the same... or thereabouts. Their website mentions that one of the biggest influencing factors as one scales up is the cooling fan and water pump.
Thanks again for all the info guys!