-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Red Ball Militaria and MV Parts Swap Meet - Jim Thorpe PA 3/1/14
- Thread starter maddawg308
- Start date
aheilmann68
Member
- 228
- 1
- 18
- Location
- North NJ
I am planning on going. I also have some things I can throw in the truck if anyone is interested.
m105 front caster wheel
m105 parking brake levers
m35a2 generator (t/o off a crated motor)
nato slave cable ends
3 bottles of brand new DOT5 fluid (1-qt bottles Motor medic label)
2 tool boxes from a generator trailer (8"x30" I think)
m105 suspension/bob kit
LDT427 injectors (t/o)
I am looking for a pressure transducer that threads into the PCU on the floor of the 939A2's for the CTIS. Here are the pictures I have of it. Mine was broken clean off and the epoxy putty as expected didn't work to try. I know the CTIS is waiting for the pressure signal from this before going on to the other checks and operation. I really just want to see if this part is the only thing on the CTIS system that does not work.
m105 front caster wheel
m105 parking brake levers
m35a2 generator (t/o off a crated motor)
nato slave cable ends
3 bottles of brand new DOT5 fluid (1-qt bottles Motor medic label)
2 tool boxes from a generator trailer (8"x30" I think)
m105 suspension/bob kit
LDT427 injectors (t/o)
I am looking for a pressure transducer that threads into the PCU on the floor of the 939A2's for the CTIS. Here are the pictures I have of it. Mine was broken clean off and the epoxy putty as expected didn't work to try. I know the CTIS is waiting for the pressure signal from this before going on to the other checks and operation. I really just want to see if this part is the only thing on the CTIS system that does not work.
Last edited:
- 10,866
- 763
- 113
- Location
- Appomattox, VA
Good idea!
- 7,058
- 148
- 63
- Location
- Mid Hudson Valley NY
I wont be going, my kids brought home a stomach bug, they decided to share it with me. I feel terrible, been puking my guts up. Sorry to miss everyone tomorrow.
bonedoc
New member
- 502
- 1
- 0
- Location
- Bangor, PA
Any particular time you guys are meeting in the dining hall? I work till 11 a.m. and plan on heading over after that. Should be there by noon.
jatonka
Well-known member
- 1,802
- 87
- 48
- Location
- Ephratah, New York
I'm down here now, they have even more tables set up than last year. Looking forward to seeing old friends and meeting new ones, you too DH and Maddog!!!!! Jatonka, alias John T
jatonka
Well-known member
- 1,802
- 87
- 48
- Location
- Ephratah, New York
Emmado22, really going to miss not seeing you and Ken, better be healthy for Sussex!!!! JT
Badojeep
Member
- 60
- 2
- 8
- Location
- Middletown DE
plan on going, hope to meet some of you there. Tom
Lieutenant Dan
Member
- 862
- 6
- 18
- Location
- Reading Pa
I'll be there around 10 or so. Hey jatonka will you have your Filter setup there? I'd like to look at one.
- 10,866
- 763
- 113
- Location
- Appomattox, VA
I'm tempted to bring some stuff to sell, and hope they have an extra table laying around noone is using. Anyone know if that might fly? Too late to call the organizers and see....
- 7,058
- 148
- 63
- Location
- Mid Hudson Valley NY
I had some tables, and can't go. So there should be some available.
jatonka
Well-known member
- 1,802
- 87
- 48
- Location
- Ephratah, New York
Yes, all the filter kits, lockout hubs, canvas seat covers, radiator, clean air kit, PTO, lots more. See you
84cucv1ton
Active member
- 1,822
- 0
- 36
- Location
- New Jersey
I'll be going. Anyone needs some Chevy CUCV parts? Let me know. Looking to sell off the rest of what I have. i have a bunch of 6.2s. Anyone have a good 6.2 24 V starter?
Lieutenant Dan
Member
- 862
- 6
- 18
- Location
- Reading Pa
Had a good time today and even got to meet a few of you. Jatonka is a great guy I gotta save my Pennys for some filter kits and hubs!
jeremymx26
New member
- 211
- 3
- 0
- Location
- Brownsville ,PA
I also got to meet a few members. The show was great. I was able to pick up a good many things I needed mostly from jatonka who was nice enough to bring everything to the show for me. Great guy to deal with.
Now if we could get a break in this weather so I could install some things.
Now if we could get a break in this weather so I could install some things.
- 10,866
- 763
- 113
- Location
- Appomattox, VA
Had a great time at the show yesterday - met a couple new Steel Soldiers, and a few ones I see all the time. I broke my record - usually I spend 4 hours in the car going up, 2 hours at the show, and 4 hours back. This time I stayed a lot longer, arriving at 8:30 before the doors opened, and stayed almost until 2pm, checking every box for goodies that I could save.
It wasn't a Red Ball show, without Bill Parks (SrJeeper) there. I miss my old friend. :'(
Many thanks to Art Swain for allowing me a couple square feet of his table space to put a few things of mine to sell. Thanks Art!
Also great to see the usual suspects there: doghead, antennaclimber, jatonka, HAWKMAN, 5tonpuller, tewsarmory, etc. We have a great crew of guys who hit these shows!
It wasn't a Red Ball show, without Bill Parks (SrJeeper) there. I miss my old friend. :'(
Many thanks to Art Swain for allowing me a couple square feet of his table space to put a few things of mine to sell. Thanks Art!
Also great to see the usual suspects there: doghead, antennaclimber, jatonka, HAWKMAN, 5tonpuller, tewsarmory, etc. We have a great crew of guys who hit these shows!
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,468
- 113
- Location
- Columbus, Georgia
Well, SOMEBODY has to say it: 
- 728
- 6
- 18
- Location
- New Jersey
It was great to get out and see some familiar faces and meet a couple new ones. JATONKA as always was a wealth of information answering mine and everyone elses questions with ease. Look forward to seeing everyone again soon.