• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Red's deuce/camper project

red

Active member
1,988
25
38
Location
Eagle Mountain/Utah
That is one wasted clutch assembly Red !
:whistle: Never seen one that bad before either haha.

The input shaft is what surprised me. Must have shattered the bearing on it because it moves side to side and up/down about 2 inches. The gears in the trans appear fine and move like they should, but the input is broken. So I'm on the hunt for a transmission that I can afford. Not making the kind of money I was in the oilfield, slows me down bigtime at the moment.

After shipping the DT466 engine ran me $1250.
 

red

Active member
1,988
25
38
Location
Eagle Mountain/Utah
After checking over the cost to get this truck exactly how I wanted, realized it was much cheaper for me to go to a 5 ton. Leaning towards a m820 or m934 but won't be starting a camper build till at least the summer.
 

Another Ahab

Well-known member
17,995
4,548
113
Location
Alexandria, VA
After checking over the cost to get this truck exactly how I wanted, realized it was much cheaper for me to go to a 5 ton. Leaning towards a m820 or m934 but won't be starting a camper build till at least the summer.
That's not a problem. It's going to be good, so:

- We'll be waiting. :popcorn:
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks