Remote Brake Reservoir- Bubbles when brake applied

[Dbluff]

SS - Hi, just installed BM remote brake reservoir. When applying brake lots of bubbles come up to it and push a lot of fluid out.

Any thoughts?

Bleed all brakes now?

 

[gimpyrobb]

Some air will be normal as you are pushing fluid from the remote reservoir into the master reservoir. If you didn't open any of the brake lines you should not need to bleed them.

 

[Dbluff]

Thinking to amount of fluid I put in, it may have been quite low…

Prob need to bleed, is it pass rear furthest away to do the bleed??

Some air will be normal as you are pushing fluid from the remote reservoir into the master reservoir. If you didn't open any of the brake lines you should not need to bleed them.

 

[hndrsonj]

Don't forget the bleeder on the air-pack.

 

[gimpyrobb]

Air pack first then furthest to nearest. I do the rear axles first then the front.

 

[Dbluff]

10-4, thanks.

Air pack first then furthest to nearest. I do the rear axles first then the front.