Removing pin haldex brake valve

[Givinup]

Hello,

How do I remove the pin that holds the red and yellow haldex air brake valve in place? Is there a name of tool required?

Sent from my SM-G955U using Tapatalk

 

[Suprman]

Real pain in the A. I have had to tap them out with a long thin punch. There is probably a tool somewhere to do it right. Some do not want to come out you have to break them.

 

[Rebuilder]

I made something like this out of a small c clamp... https://www.matcotools.com/catalog/product/ppt13/roll-pin-removal-tool/

 

[NDT]

Handles are stocked at heavy truck parts houses.

 

[Givinup]

I made something like this out of a small c clamp... https://www.matcotools.com/catalog/product/ppt13/roll-pin-removal-tool/

Awesome, I'll check it out and see if I can do something similar. I've seen a few handles that are screw off, wanted to make sure I wasn't missing something.

They are definitely a pita. Have everything disassembled except the stupid roll pins.

Sent from my SM-G955U using Tapatalk

 

[simp5782]

Find the allenhead size wrench to fit in it snugly, cut the elbow off and then knock it out. If you replace the whole valve the new one will have a push/spring lock setup.

 

[coachgeo]

Just drill it out slowly stepping up the sizes as you do it?

 

[Givinup]

Originally I was hoping to use the old handles. Looks like that won't be the case.

Sent from my SM-G955U using Tapatalk

 

[Givinup]

Just drill it out slowly stepping up the sizes as you do it?

I kind of took this approach. Just cut the head off for now. It was getting in the way of progress. I'll have to replace with push pin style later. Truck will stay parked for a while.

Sent from my SM-G955U using Tapatalk

 

[BuiltMFG]

Handles are stocked at heavy truck parts houses.

I picked both the red and yellow up at O'reilly for $14 or so

 

[FloridaAKM]

I just changed out the entire center console as the fan motor was burnt out & the rest of it was severely beat up.