• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Repair of M101A1 cable harness?

Greatthumper

Member
35
3
8
Location
Audubon, NJ
Can the trailer harness be repaired? I have two pins pushed into the harness. The part I am referring to is "intervehicular cable, NSN 6150008306672. Page 3-1 of the TM. I am willing to give it a try, whats the worse that can happen. If I break it any more I still have to replace it.
 

KsM715

Well-known member
5,149
142
63
Location
St George Ks
Yes it can be taken apart. loosen the clamp at the back end of the connector and grab the connector in one hand and the cable in the other and push them together. The metal sleeve that holds all the pins should push out of the front of the connector. You can work the pins back in place once its out. You may have to take some silicone spray lube and a small screwdriver and work it down inbetween the steel sleave and the connector.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks