Hammer
Well-known member
- 1,483
- 398
- 83
- Location
- Winlock, WA
K&N Crankcase Vent Filters
Those are the styles that I use.
Those are the styles that I use.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Replaced Axle Vents
- Thread starter M35A2-AZ
- Start date
- 3,222
- 392
- 83
- Location
- Tonopah, AZ
- 12,195
- 325
- 0
- Location
- gainesville, ga.
I found that a CHEAP $0.59 in line gas filter works GREAT at the end of the vent system, what even works BETTER is the cheap $1.59 porous stone filter
Hammer
Well-known member
- 1,483
- 398
- 83
- Location
- Winlock, WA
While I have used those cheapo units, they do NOTHING for moisture.
Seems that the oil on the K&N ones helps out for the moisture (not sure HOW much, but some at least.) But should do a GOOD job of keeping the water out when washing the truck, going through water crossings, etc.
Those little vent ones were pretty cheap a few years ago, but I see that they are about $15 to $18 each now. Still not too bad for a GOOD filter that will probably last forever on our trucks.
Seems that the oil on the K&N ones helps out for the moisture (not sure HOW much, but some at least.) But should do a GOOD job of keeping the water out when washing the truck, going through water crossings, etc.
Those little vent ones were pretty cheap a few years ago, but I see that they are about $15 to $18 each now. Still not too bad for a GOOD filter that will probably last forever on our trucks.
quickfarms
Well-known member
- 3,495
- 25
- 48
- Location
- Orange Junction, CA
Those are the k&n that I have used. I use the one that have a stud on the top and mount it on the firewall or top lip of the bed.