-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Request M35A2 Retrieval info
- Thread starter Derpy
- Start date
- 6,556
- 13,941
- 113
- Location
- Hawthorne, NV.
Start with the transfer case and see if it is in high or low. The shift handle pulled all the way up is high.
- 6,556
- 13,941
- 113
- Location
- Hawthorne, NV.
See if the windshields can be opened from the outside, if you can open them, then crawl in and your in business.
![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]"){kind=icon}
- 5,370
- 3,383
- 113
- Location
- Lexington, South Carolina
On the hard top, see if you can get the back window open while laying on the top of the cab. Then use one of those 'can, top shelf reachers' to hook over the door handle (with Soldier B giving directions while looking in from the other side) and pull on it.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
I know your post is helpful, SCSG-G4, but what's funny is here's the image that popped into my head:
Last edited:
- 6,556
- 13,941
- 113
- Location
- Hawthorne, NV.
An M185A3. Was on Gov Planet.
Last edited:
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Just got off the phone with the guys, it turns over but doesn't fire. Might be hyd head button fell off.
nukem
Member
- 73
- 15
- 8
- Location
- Decatur,Al.
I've been on sort of a hiatus. I'm in Priceville and have a drawbar with two sets of feet. Where are you and truck located? David
nukem
Member
- 73
- 15
- 8
- Location
- Decatur,Al.
Pm me a phone number��
- 6,556
- 13,941
- 113
- Location
- Hawthorne, NV.
Does he have fuel at the secondary filter relief valve?
- 14,639
- 4,820
- 113
- Location
- Buchanan, GA
I made mention in his infraction that trying to duke it out on the forum isn't the way to handle things. Looking at all his posts, he wants to be banned. We're not going to ban him outright, he knows the rules. He has 5 strikes like everyone else. He will eventually hang himself.
okay update on the truck, we bleed air out of all lines, got all lines to pump fuel ut it losses pressure after 10 seconds, Gimpy Rob said that he HH's button probably fell of and its in a area that is not suited from inline maintenance. we wanted to make that a last resort action. we got it to fire off of ether and ran for a good second then stalled out. seems that there not enough fuel getting to it to stay running. we are going to go back with equipment to reduce and debry getting into that HH cuase i will be wading in mud.
So what is this button that Rob speak of look like and do i need to get a replacment or can i re attach it? if thats fallen off do i need certain tools to put it back on or just need my hands?
i will post thAt video if i can find it of it running.
So what is this button that Rob speak of look like and do i need to get a replacment or can i re attach it? if thats fallen off do i need certain tools to put it back on or just need my hands?
i will post thAt video if i can find it of it running.
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
texas30cal
Active member
- 484
- 87
- 28
- Location
- Brenham Tx.
That thread is good, right on the money and easy to follow. I think he may also have a YouTube video? May as well get the viton o rings and a new clip.
rustystud
Well-known member
- 9,280
- 2,988
- 113
- Location
- Woodinville, Washington
I would actually prefer "lethal injection" to hanging. I've always felt hanging was very barbaric !
