Revived old member

[4jfk]

Hello friends,
I'm an old member who just took a long sabbatical. Lol. I'm finally hooking up my dump on my deuce. I'm needing a few parts. Linkage and brackets, and an auxiliary unit for my existing PTO. Can anyone point me in the right direction? Thanks

 

[Evil Dr. Porkchop]

Is your deuce a factory dump truck or did you convert an m35 to dump?

 

[4jfk]

I'm converting it sir. I have the PTO, winch handle, but no bracket to mount it to, and I have the original valve, pump on the self-contained bed tank. Thanks

 

[m16ty]

The PTO rear output is hard to find. It may be easier to get a transfer case PTO, or if your aren’t planning on having a PTO winch, just drive the pump off the front output. I’ve done it both ways, if you need more info.

Edit- I see in your other post where you have a factory pump and valve. You’ll probably have to use a rear output PTO unless you modify your existing pump. I don’t know what to tell you, but good luck finding a rear output.

 

[4jfk]

Thanks so much Eastern Surplus shows they have an accessory drive.