Rim specs

[rollingscrapmetal]

What are the specs on the rims for these i think it was 6x7.25 but i need the hub size

 

[98G]

@od1984 should have the answer.

 

[od1984]

@od1984 should have the answer.

Will have to measure one tomorrow.

 

[rollingscrapmetal]

Any chance someone has an old 230 laying around to take measurements off

 

[gringeltaube]

What are the specs on the rims for these i think it was 6x7.25 but i need the hub size

6 on 7.25" pattern is correct, and the center hole diameter is 5.5"

 

[rollingscrapmetal]

6 on 7.25" pattern is correct, and the center hole diameter is 5.5"

 

[rollingscrapmetal]

Thatll do

 

[G744]

In post #6, I believe that is a trailer wheel.

M715 wheels are a lockring type.

 

[rollingscrapmetal]

Im going to recut it to fit the 715

 

[rollingscrapmetal]

Should do it tomorrow at work

 

[rollingscrapmetal]

Did the rims looking for tires for them now since i was just given the truck after finishing them

 

[msgjd]

it appears you're transitioning away from the OEM rims and 900x16 tires .. Don't forget to check the clearance the inner dish of the replacement rims have on tie rod ends etcetera, especially at the extremes of left-turn and right-turn. How much ground clearance are you gonna lose?

 

[rollingscrapmetal]

Theyre also 16 inch and about the same width just flatter across the front so they should clear everything better as far as ground clearance it has 9-16 on it now which looks to be somewhere between 35 and 37 so i was looking for bigger tires idk what size though