• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

S-280 Shelter Door Pics Requested

Tinstar

Super Moderator
Super Moderator
Steel Soldiers Supporter
4,288
1,773
113
Location
Edmond, Oklahoma
Trying to replace all the missing items from the shelter door.
Door itself is straight and seals are great, just parts missing.
Pics online do not show much of the doors. Especially inside view

Could you guys please post pics of the inside and outside or your shelter door?

S-280 model only please.

Thanks
 
Last edited:

chevykid1977

New member
8
0
0
Location
central,il
looks like moisture in box and there was till it was sealed now has water stains everywhere and with the weather changing it seems to sweat ...
 
Last edited:

firefox

General
Steel Soldiers Supporter
1,845
51
48
Location
Berkeley CA
You might get a small fan powered off of a small solar panel to exaust the air.
I think someone else here did that with good results.
 

m16ty

Moderator
Moderator
Steel Soldiers Supporter
9,579
217
63
Location
Dickson,TN
I haven't noticed mine sweating on the inside like that. I agree a small fan would help, mine is sitting right beside the shop so I could power it up and just use the stock exhaust fan.

Looking at the pics, I can't help but notice how many different ways they are set up. Seems almost no two S-280 shelters are exactly the same. Mine has two small fans in the front (one blows out and the other blows in), big air conditioner hole in the left side, and power connection on the back left near the top. It was set up to be a electronics repair shelter.
 

chevykid1977

New member
8
0
0
Location
central,il
mine doesn't have the exhaust fans in it ..there is only two covered large spots in the front where the a/c units went ..maybe that's why ..as this box seems to be sealed for the most part good ..when i close the door with the floor plug in it fights me and you can hear the air whistle out around door as it closes ..i think that may be part of the issue ..thanks
 

m16ty

Moderator
Moderator
Steel Soldiers Supporter
9,579
217
63
Location
Dickson,TN
I've been leaving my floor plug out but I guess I should at least install it loosely to keep mice and such out. Mine isn't all that tight, only thing that seals the exhaust fans is a aluminum weather flap.
 

firefox

General
Steel Soldiers Supporter
1,845
51
48
Location
Berkeley CA
You might just stick a piece of screen in the hole. That way you get more air flow and
water still gets out easily. Just an idea.
 

firefox

General
Steel Soldiers Supporter
1,845
51
48
Location
Berkeley CA
Tinstar, do you still need pics? I don't think my S280 is the standard type,
so I don't think it would help much. What specifically are you looking for?
 

Tinstar

Super Moderator
Super Moderator
Steel Soldiers Supporter
4,288
1,773
113
Location
Edmond, Oklahoma
Yes more pics please.
Looking for parts I'm missing and using pics for reference.

I dont think any S-280 is standard.
Never seen two exactly alike.
 
Top