- 111
- 3
- 16
- Location
- Conway, SC
I am picking up my 1038 hopefully soon. I am considering sandblasting the non-carc paint off. What type of media should I use? Any pointers anyone has are appreciated.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Sandblast HMMWV 1038 non CARC
- Thread starter Stevepsc
- Start date
- 5,580
- 349
- 83
- Location
- DESOTO, KANSAS
Dry ice
bobwire
Member
- 33
- 3
- 8
- Location
- Satellite Beach Florida
Soda blast would be the least aggressive.
bikeman
Well-known member
- 2,894
- 502
- 113
- Location
- Ft. Bragg, NC
Wear a respirator. Look up the chemicals that are in CARC and pay attention when working with it.
1190KTM
New member
- 5
- 0
- 1
- Location
- Chandler, Oklahoma
Either a soda or use garnet of some sort. Roughly 80 to 120 mesh. You could use crushed glass but it would need to be a medium grit to be effective on metal. Personally I'm a fan of using garnet.
Sent from my SAMSUNG-SM-N920A using Tapatalk
Sent from my SAMSUNG-SM-N920A using Tapatalk
- 307
- 153
- 43
- Location
- Sweeden, KY
My latest M-1038 has some panels peeling all the way to bare metal so I have been thinking I would blast them. I see Tractor Supply has garnet for $25 for 50 lbs, so it is not cheap. Do you sweep it up and get a couple of uses out of it?
Sent from my iPhone using Tapatalk
1190KTM
New member
- 5
- 0
- 1
- Location
- Chandler, Oklahoma
You can if you're using a dry system. If you're using a vapor blaster, which is what I suggest, you cannot reuse. The reason being is because if you recycle and contaminate the system there's no telling what will be in your media when you put it back in.
Sent from my SAMSUNG-SM-N920A using Tapatalk