bulldog_mack13
3/3 ACR
- 2,968
- 34
- 0
- Location
- Colo Springs, CO
Ugly but cool!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Save me from the tourch m75 apc
- Thread starter philinmt
- Start date
lstmate
Member
- 301
- -1
- 16
- Location
- Jasper, IN
UH60...
UH60....
I'll make a deal with you.... you buy it and I will store it for you for free.....or at least with an agreement to let me drive it everynow and then to keep it in top running condition.
Sounds like a good deal to me...
Of course it will be here to be part of the 2009 MVPA convention.
UH60....
I'll make a deal with you.... you buy it and I will store it for you for free.....or at least with an agreement to let me drive it everynow and then to keep it in top running condition.
Sounds like a good deal to me...
Of course it will be here to be part of the 2009 MVPA convention.
- 10,865
- 762
- 113
- Location
- Appomattox, VA
RE: UH60...
C'mon guys, that's a SCREAMING deal on a tracked vehicle, that's pretty complete and in need of a mild resto. SOMEONE SAVE IT! We can't let good pieces like this get cut up, like that rare military trencher did last year...
C'mon guys, that's a SCREAMING deal on a tracked vehicle, that's pretty complete and in need of a mild resto. SOMEONE SAVE IT! We can't let good pieces like this get cut up, like that rare military trencher did last year...
- 8,281
- 649
- 113
- Location
- Corpus Christi, TX
RE: UH60...
Will it start to load it up onto a truck? You say it started 5 years ago...what about now?
break
Anyone know who does AFV refurb in the PA/MD/VA/WV area? I want a piece of armor. This wasn;t the piece I was looking for (actually wanting a armored car) but beggars can't be choosers and the price is decent depending on shipping, storage, refurb.
Will it start to load it up onto a truck? You say it started 5 years ago...what about now?
break
Anyone know who does AFV refurb in the PA/MD/VA/WV area? I want a piece of armor. This wasn;t the piece I was looking for (actually wanting a armored car) but beggars can't be choosers and the price is decent depending on shipping, storage, refurb.
dispatcher1011
Member
- 153
- 0
- 16
- Location
- NW PA/ Warren County
medlog,
define armored car, please.
define armored car, please.
woodwalker
Member
- 71
- 7
- 8
- Location
- boone colorado
hello armored car=wheels
full tracked vehicles require a lot of maintnence
parts are out there for the m75 but are getting up in price
if you have help they are managble and if you can afford gas they are really fun to drive
this is not a bad price considering the picture
shipping is a real bugger at the moment.
full tracked vehicles require a lot of maintnence
parts are out there for the m75 but are getting up in price
if you have help they are managble and if you can afford gas they are really fun to drive
this is not a bad price considering the picture
shipping is a real bugger at the moment.
just takes time
Well clean out the stinky gas,buy new gas replace the two batterys and it will run, I will help load but I will not buy gas or batterys but I do have a crane and a 60,000lb winch. Just for the iniformed out there check out this link for scrap ......Phil in Mt
http://www.dot.state.oh.us/construct..._for_PN525.htm
Well clean out the stinky gas,buy new gas replace the two batterys and it will run, I will help load but I will not buy gas or batterys but I do have a crane and a 60,000lb winch. Just for the iniformed out there check out this link for scrap ......Phil in Mt
http://www.dot.state.oh.us/construct..._for_PN525.htmsri try this link http://www.dot.state.oh.us/construction/oca/Steel_Index_for_PN525.htm 
bill45colt
New member
- 9
- 0
- 1
- Location
- hazel green, alabama
m75 apc
please contact me on m75 apc what has been done in the way of demil
what is needed to make it complete
what engine, and power train is in it
clutches and driver station complete?
all driving parts there?
how heavy is it
how wide tall and long is it.
not familiar with m75a thats obvious
Im interested if the above conditions can be clarified and I can haul it on my trailer or know what sort of hauling rig is needed.
low boy trailer, mid level bed, or regular height trailer
thanks bill.strickland@us.army.mil
huntsville alabama 256-955-2746 work 256-585-4600 cell
please contact me on m75 apc what has been done in the way of demil
what is needed to make it complete
what engine, and power train is in it
clutches and driver station complete?
all driving parts there?
how heavy is it
how wide tall and long is it.
not familiar with m75a thats obvious
Im interested if the above conditions can be clarified and I can haul it on my trailer or know what sort of hauling rig is needed.
low boy trailer, mid level bed, or regular height trailer
thanks bill.strickland@us.army.mil
huntsville alabama 256-955-2746 work 256-585-4600 cell
BEASTMASTER
Active member
- 899
- 142
- 43
- Location
- Burgaw, N.C.
SOUNDS LIKE SOMEBODY NEEDS A NAP!!!!
- 5,259
- 3,975
- 113
- Location
- Charleston, WV
Bill, it is 204" long, 112" wide, and 119" tall. It weighs in around 37k lbs empty, give or take. It's powered by a 6 cylinder AO-500-4 Continental gasser and is run with a CD-500-4 cross-drive tranny. Some were built by FMC just down the road from where I grew up in WV. Looks like it has some demil cuts to the hull and hatches. Wouldn't be too hard to weld up. I hope you save it.
Chris
Chris
- 8,281
- 649
- 113
- Location
- Corpus Christi, TX
Yep, I hope he can. I could flip the bill but the trans and refurb are the issue with me.