- 4,233
- 3,309
- 113
- Location
- Near Austin, Texas
I guess getting two new-in-the-bag for $5 each was a good deal for me...
Didn't know the metal spouts worked with the plastic cans, thanks for that tip.
Cheers
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Scepter Military Fuel Can Spout
- Thread starter fal_shooter
- Start date
Didn't know the metal spouts worked with the plastic cans, thanks for that tip.
Cheers
WPNS421
New member
- 441
- 3
- 0
- Location
- Cantley Quebec
I can buy some the MFC nozzles directly from Scepter, these nozzles are brand new. The price for the nozzles is $27.00 each plus 5% tax and transport and that is with 0% markup. I can get a better price if I buy 100 to 200. The going price of these will be $30-$35 ea + shipping. Yea it is expensive but supply versus demand!!!! I also found out why the Scepter cans are not surplused by the military in the US: reason EPA rules
skark_burmer
Member
- 143
- 1
- 18
- Location
- San Jose, Ca
Those are the 1-1/8 spouts?
If so you can put me down for one. Its nice to have a spare.
If so you can put me down for one. Its nice to have a spare.
Attachments
WPNS421
New member
- 441
- 3
- 0
- Location
- Cantley Quebec
nozzles
I can get both types the 3/4 in and the 1 1/8, will probable go with 1 1/8 Scepters sells them cost $30. ea
emr
New member
- 3,209
- 25
- 0
- Location
- landing , new jersey
Yea its the greenies that have em outlawed in alomost all states, not all yet though, they say in long term storage there is the 'possibility" of PSBs leaching thru the plastic, these cans are made to be run over by a vehicle the size of a Humvee ..when full of fuel of course and will not burst they also are the only can i know of rated to be carried in an air plane full, these are super cans for sure, funny how they will not allow the sale of spouts and such when its the can that has the "possibility " of leaching the bad bad bad stuff that may do us all in someday. LOL...Just incase some guys do not know they allso sell the satraps that hold the lid on in yellow for diesel and red for gas, and i think blue foe kero too, mind is funny on remembering that one but think so, So u guys in Canada can get those too, I bought 30 yellow and 20 red when i went thru having my cans and parts sent all over the country to get em to NJ....Thanks for chiming in from canada to help us yanks out...
WPNS421
New member
- 441
- 3
- 0
- Location
- Cantley Quebec
No problem as soon as I get news I will post.Yea its the greenies that have em outlawed in alomost all states, not all yet though, they say in long term storage there is the 'possibility" of PSBs leaching thru the plastic, these cans are made to be run over by a vehicle the size of a Humvee ..when full of fuel of course and will not burst they also are the only can i know of rated to be carried in an air plane full, these are super cans for sure, funny how they will not allow the sale of spouts and such when its the can that has the "possibility " of leaching the bad bad bad stuff that may do us all in someday. LOL...Just incase some guys do not know they allso sell the satraps that hold the lid on in yellow for diesel and red for gas, and i think blue foe kero too, mind is funny on remembering that one but think so, So u guys in Canada can get those too, I bought 30 yellow and 20 red when i went thru having my cans and parts sent all over the country to get em to NJ....Thanks for chiming in from canada to help us yanks out...
- 7,058
- 148
- 63
- Location
- Mid Hudson Valley NY
Customs has caught on to the "ship illegal Scepter fuel can products to the US for huge profit", and have been confiscating it at the border...............
shootiniron
New member
- 487
- 13
- 0
- Location
- Escalante,Utah
You would think that those brave lads diligently gaurding our border would have higher priority targets to apprehend than the lowly gas can spout.
Milkman357
Member
- 177
- 15
- 18
- Location
- Des Moines, IA
Any update
Has anybody found a way to get the Scepter nozzle here in the US?
Drive to Canada... Fill engine compartment with nozzles.. sneek back accross the border.. dont look guilty...
Geez what happened to the Adults that were running this country!
Maybe i should ask the Illegals on the corner to smuggle me some back from their country...
Has anybody found a way to get the Scepter nozzle here in the US?
Drive to Canada... Fill engine compartment with nozzles.. sneek back accross the border.. dont look guilty...
Geez what happened to the Adults that were running this country!
Maybe i should ask the Illegals on the corner to smuggle me some back from their country...
Stan Leschert
New member
- 1,662
- 90
- 0
- Location
- North Vancouver, BC, Canada
Try NAPA. They were able to get some of the Scepter products that I wanted, and didn't have to drive over to the plant. Way easier!
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 757
- 113
- Location
- Cincy Ohio
They are crap, don't waste your money. Find one of the "donkey ****" spouts, they are mo-better.
kipman
Active member
- 2,514
- 15
- 38
- Location
- Lancaster Ohio
Yup, steel ones work and last.
Milkman357
Member
- 177
- 15
- 18
- Location
- Des Moines, IA
Mine leaks
My Donkey leaks... can they be tightened?
My Donkey leaks... can they be tightened?
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 757
- 113
- Location
- Cincy Ohio
When mine leaked, I put a new rubber ring on it and that solved the problem.
Milkman357
Member
- 177
- 15
- 18
- Location
- Des Moines, IA
ok....
Where does someone find a new rubber for their Donkey?
(i guess I had to say it)
Where does someone find a new rubber for their Donkey?
(i guess I had to say it)
- 34,012
- 1,810
- 113
- Location
- GA Mountains
Also, check the vent tube in the can. They can and do get blocked. When clear you can dump a can of fuel in a minute.
Hal O'Peridol
Member
- 121
- 4
- 18
- Location
- Blaine, WA
I just bought a brand new can In Vancouver BC for 75 dollars Canadian, They are in stock at a company called Princess Auto, kind of a high class Harbor Freight.
- 2,112
- 555
- 113
- Location
- Davis County, UT
I received my package from JAGMTE. It was very well packaged in separate padded pouches and then combined into one padded envelope.
I had a can with a shredded cap strap. I had to break the collar ring to get it off it was such a tight fit. In the picture below is a side by side comparison of thicknesses of the new strap (left) from JAGMTE and the original one from Scepter (right). The new one is slightly thinner, and thus, more flexible.
Last edited:
rustystud
Well-known member
- 9,297
- 3,070
- 113
- Location
- Woodinville, Washington
It's always nice to have good information about parts and suppliers out there ! Good job Valence !
Jakob1944
New member
- 314
- 10
- 0
- Location
- Copperas Cove / Texas
As big as Ft Hood is there isn't a Scepter can to be found......They got those under lock and key.....I'm running Jerry Cans, the NATO approved ones not the Chinese repo.....