willy
New member
- 101
- 1
- 0
- Location
- Martinez, CA 94553
Looking for a Seebee Emblem to paint my A3 truck
Willy
Willy
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Seebee emblem
- Thread starter willy
- Start date
Capt.Marion
Active member
- 1,811
- 15
- 38
- Location
- Atlanta, GA
If you search for "Seabee" you might get a bit more results. Use the Google search function; it's much more effective than the regular search bar. It's at the bottom of the drop-down menu when you click on "Search" along the bar at the top of the page.
Also; do you want pictures, or are you searching for actual stencils to use on your truck?
Also; do you want pictures, or are you searching for actual stencils to use on your truck?
Last edited:
- 34,012
- 1,808
- 113
- Location
- GA Mountains
As does polverone. Stickershock@gmail.com He can do decals or paint masks.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Yep, here's the actual Sea-Bee page.seabee trucks
quickfarms
Well-known member
- 3,495
- 25
- 48
- Location
- Orange Junction, CA
The sea-bee's museum at in California, port hueneme, sells the brass stencil in there online gift shop
http://www.seabeemuseumstore.org/item.php?cid=10&id=4448
http://www.seabeemuseumstore.org/item.php?cid=10&id=4448
67Beast
Well-known member
- 982
- 496
- 63
- Location
- Silver Lake Sand Dunes MI.
Yep, and I also have just the Seabee logos available in either a decal or paint mask.
seabee logo
seabee logo
quickfarms
Well-known member
- 3,495
- 25
- 48
- Location
- Orange Junction, CA
does any one know where I can get the correct bumper marking for CBMU-303?
southdave
Active member
- 1,986
- 6
- 38
- Location
- ripley, oh/TDY Lordstown,Oh
FYI.. The gulfport muesum has the brass stencil @ there online shop last I look about 1.5 yrs ago
http://www.seabeemuseumstore.org/item.php?cid=10&id=4448&return=search&q=stencil
http://www.seabeemuseumstore.org/item.php?cid=10&id=4448&return=search&q=stencil
Last edited:
southdave
Active member
- 1,986
- 6
- 38
- Location
- ripley, oh/TDY Lordstown,Oh
looking for Beep sticker?? thought they where blue trapzoid looking thingy .. NavFac P4100 should have the info the ones I had usesally said US Air Force ,or USMC with a primer over lay cause who would look for a calmshawed CUTVEE anyway lol...
Last edited:
quickfarms
Well-known member
- 3,495
- 25
- 48
- Location
- Orange Junction, CA
Actually it looks like a round decal of some sort.
If you look at photo 6 in my photo ablum you can see the shiny outline of where it was.
That could also be for the THIRD NAVAL CONSTRUCTION BRIGADE
The vehicle was there until it was tranfered to the Construction Battalion Maintenance Unit Three Zero Three, CBMU-303, San Diego in September 1995
Per Nafac P-300, may 1997, 2.14.17 J 1 ,the round deacl is in the correct location for unit identification
If you look at photo 6 in my photo ablum you can see the shiny outline of where it was.
That could also be for the THIRD NAVAL CONSTRUCTION BRIGADE
The vehicle was there until it was tranfered to the Construction Battalion Maintenance Unit Three Zero Three, CBMU-303, San Diego in September 1995
Per Nafac P-300, may 1997, 2.14.17 J 1 ,the round deacl is in the correct location for unit identification
Last edited:
quickfarms
Well-known member
- 3,495
- 25
- 48
- Location
- Orange Junction, CA
It looks like it is a round red circle with a 303 in it
I found this picture on CBMU-303's facebook wall
I found this picture on CBMU-303's facebook wall
Attachments
saddamsnightmare
Well-known member
- 3,618
- 80
- 48
- Location
- Abilene, Texas
March 14th, 2012.
Rick LArsen also has the paint masks and stencils I believe.... BUT you'll never convince most folks it was a seabee truck unless it has lots of rust in the undercarriage from salt water.....
Rick LArsen also has the paint masks and stencils I believe.... BUT you'll never convince most folks it was a seabee truck unless it has lots of rust in the undercarriage from salt water.....
southdave
Active member
- 1,986
- 6
- 38
- Location
- ripley, oh/TDY Lordstown,Oh
FYI m35a2 was removed from TOA 1n the eighties should have that augment sticker, I think that is in that Navfac book lol
Last edited:
cbvet
Active member
- 1,567
- 20
- 38
- Location
- Northwest (Knox) Indiana
Seabee trucks
Trucks will frequently be transported by ship, but Seabees generally fly to their destination. Way too important to spend all that time at sea.
I had 6 hours "sea" time.
There's really not much of a relationship between the fleet Navy & the Seabees.
Seabees are more like Marines, but their parents were married.
Actually, very few Seabees or their trucks ever get in salt water.March 14th, 2012.
Rick LArsen also has the paint masks and stencils I believe.... BUT you'll never convince most folks it was a seabee truck unless it has lots of rust in the undercarriage from salt water.....
Trucks will frequently be transported by ship, but Seabees generally fly to their destination. Way too important to spend all that time at sea.
I had 6 hours "sea" time.
There's really not much of a relationship between the fleet Navy & the Seabees.
Seabees are more like Marines, but their parents were married.
southdave
Active member
- 1,986
- 6
- 38
- Location
- ripley, oh/TDY Lordstown,Oh
amphib units out of little creek and and san diego ACB 1 & 2 all they have is salt
http://www.youtube.com/watch?v=6GT_YT_Txxg
http://www.youtube.com/watch?v=6GT_YT_Txxg
quickfarms
Well-known member
- 3,495
- 25
- 48
- Location
- Orange Junction, CA
My avitar shows my truck playing in the salt water but the rust is very minimal mostly a result of spay being kicked up by the fan. There is under coating every place and in some places that indicate it was put there before the factory assembled the truck.