Share a load GI?

[Pappa-G]

I am expecting my EUC for my M818 in Feb. If anyone needs something Shipped from Chambersburg PA to anywhere with in 100 miles of Lansing, MI for HALF the regular price let me know. The rig can fit any thing the size of a M35 or smaller (length).
All the right reasons to get the little lady that Tractor shes been wanting! Look at all the money you'll save. (this is my favorite) Something that the whole family can enjoy!!

PM me ~ Thanks

 

[ida34]

What would half be for a deuce or five ton? I am near Ann Arbor.

 

[Pappa-G]

Before Armada chimes in, half of a 2.5 ton would be 1.25 and half of a 5ton is 2.5 ton.
Now that thats been said
I was quoted $2.50 per loaded hub mile. For just the haul I would estimate $650 (on the high side) but also factor in the price of getting it loaded onto the flatbed. I was told $170, now that was for one, weather a second truck would be that price again or we would get a break I dont konw. There would be anadditional savings if we can unload at one place. So if you would have access to a loading ramp I could tow mine home from there. But whan all is said and done $850 is still alot cheaper than $1470.

Thanks ~ Nick

 

[ida34]

I don't have a loading ramp but if we can get something going I could probably make a cheap one. I will have to see if I can win anything at Chambersburg. No matter what that sounds like a good deal. I will have to see if I can get something. There are several deuces but I am holding out for a five ton. I was hoping for a tractor but it seems like they only have cargo's right now. As soon as I know something I will let you know. Is the your hauler set up to load non-running trucks or would it need to run?

Thanks
Chuck

 

[Pappa-G]

Nonrunning or running it doesnt really matter. Armada and I have pulled nonrunners up on to trailers before, it would be the same thing in reverse right?

 

[ida34]

I don't think I am going to get anything from PA. I got a line on a tractor closer and will work on that deal. Sorry I wish we could have worked it out.

Chuck

 

[rizzo]

Re: RE: Share a load GI?

I don't think I am going to get anything from PA. I got a line on a tractor closer and will work on that deal. Sorry I wish we could have worked it out.

Chuck

hmmmmm

 

[Armada]

RE: Re: RE: Share a load GI?

Still room for a deuce sized truck, another M818 tractor, M105 trailers, etc., on this load. Chambersburg PA to Michigan. Mid to end of February time frame. Anyone that's got something that needs a ride PM Pappa-G or myself.

 

[Pappa-G]

RE: Re: RE: Share a load GI?

I got my EUC today!! YEA!! Now down to the business of business. I am looking at a mid feb removal and can fit a duce or another 5 ton tractor. There are alot of nice trucks up for bid no so bid early and bid often and we can split the cost to MI. PM me or Armada.

 

[CARNAC]

RE: Re: RE: Share a load GI?

Any ideas if any of your trucks will make the trip??

I might (stress might) be coming that way to Wisconsin but would need to go to my desination first.

 

[Pappa-G]

RE: Re: RE: Share a load GI?

?? are you hauling or need to be hauled ?? I'm confused again.

 

[pfarber]

RE: Re: RE: Share a load GI?

In Dec 2007 i paid $1500 for a CCKW hauled from Ft. Lauderdale FL to Gordon PA on a custom rollback. Door to Door, and the thing didn't run or even have air in the tires.

Thats 1200+ miles for slightly over a buck a mile.

Everybody quotes $2-3 a mile, I have yet to pay over $1.15-ish.

My First CCKW came from Seattle WA to Gordon PA thats 2700+ miles and I paid $1700 in 2006 door to door.

Where are you ppl getting quotes from???

 

[Pappa-G]

RE: Re: RE: Share a load GI?

I guess the question is where are you getting yours from?? What did fuel cost in 2006?