par0thead151
Member
- 65
- 4
- 8
- Location
- wisconsin
i bought a slant back kit that was mostly complete. what it lacks is the rubber gasket that goes between the hard top and the sponsons. I have the gasket that goes on the sponsons and the tub, the hatch seals, the windshield front seal that is blind riveted down, the gasket that roes around the hatch(lacking the brackets on left and right hand sides though)...
I know there must be a rubber gasket that goes between the hard top and the frame along the perimeter of the top. also along the top portion by the hatch. I leafed through Vol 1 and Vol2 of the tech manuals i printed out and only found the part number for the front windshield gasket and the rear hatch handle gasket. all other gaskets are not in my manual.
what gives. i assume i have the wrong manual, however it DOES have a slant back with a breakdown of parts and their corresponding numbers.
basically my progress on my conversion has halted till i can acquire these seals. Im debating replacing ALL seals with new, as i would like for this to be as air and water tight as possible. I suppose this also gives me time to acquire the proper windshield as the one i have now lacks the defrost baffels.
any tips on where to acquire all new seals for my slant back? i wish someone would have a "seal kit" with all the seals needed for the truck. that would sell veyr sell IMO.
thanks
I know there must be a rubber gasket that goes between the hard top and the frame along the perimeter of the top. also along the top portion by the hatch. I leafed through Vol 1 and Vol2 of the tech manuals i printed out and only found the part number for the front windshield gasket and the rear hatch handle gasket. all other gaskets are not in my manual.
what gives. i assume i have the wrong manual, however it DOES have a slant back with a breakdown of parts and their corresponding numbers.
basically my progress on my conversion has halted till i can acquire these seals. Im debating replacing ALL seals with new, as i would like for this to be as air and water tight as possible. I suppose this also gives me time to acquire the proper windshield as the one i have now lacks the defrost baffels.
any tips on where to acquire all new seals for my slant back? i wish someone would have a "seal kit" with all the seals needed for the truck. that would sell veyr sell IMO.
thanks
