• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Soft Top ?

nspctr1

Member
187
6
18
Location
San Antonio TX
I currently have a 2 man 998. Looking at a used 4 man cover but no bulk head or rear curtain. Will the curtain and bulkhead from the 2 man work w the 4 man? If not, what is the difference. If the bulk head needs to be shorter, can it be cut down and rewelded?

Thx
 

juanprado

Well-known member
Steel Soldiers Supporter
5,606
2,899
113
Location
Metairie/La (N'awlins)
I think the only difference in the curtain is the pockets for the rear seat belt mounted on the rear fender. The bulkhead is shorter and wider for a 4 man and different brackets.
 

NDT

Well-known member
Steel Soldiers Supporter
10,432
6,476
113
Location
Camp Wood/LC, TX
The 2 man curtain is the full width of the B pillar from top to bottom. The 4 man curtain is the full width of the C pillar, then narrows to fit in the area between the rear sponsons. Most 4 man trucks do not have the narrow divider.
 

juanprado

Well-known member
Steel Soldiers Supporter
5,606
2,899
113
Location
Metairie/La (N'awlins)
I think the only difference I think in the curtain is the pockets for the rear 3 point seat belt mounted on the rear fender. The bulkhead is shorter and wider for a 4 man and different brackets.

delete double post
 

HAWKMAN

Member
830
6
18
Location
N.E. P.A.
If you need a 4 door rear curtain w/cut-outs (green) I have one with a small repair I can sell cheap2cents.....PM if interested. TX's
 

Action

Well-known member
3,576
1,557
113
Location
East Tennessee
To get from 2-man to 4-man, you need c-pillar, L&R handrails, another bow, top, rear curtsin, 2 rear doors, rear strikers, and 2 footman loops.
The handrsils, bow, and c-pillar are meeded just to get the top on.
 

Wire Fox

Well-known member
1,252
161
63
Location
Indianapolis, Indiana
Thx. So can a 2 man bulkhead be modified to a 4 man
Not easily. If you have the skills and tools to properly modify the bulkhead like that, you probably have the skills and tools to just make a new one from sheet metal. The 4 man bulkhead isn't needed and I've seen them for under $200 on the auction site if you need it for your use. I'm sure plenty of members have extra if you post up a wanted ad in the classifieds for it and the brackets. If you want to try your hand at the brackets, I recall there being a thread about them a few months ago-try searching for "bulkhead brackets" or something of the like until you find that thread.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks