- 492
- 1,156
- 93
- Location
- AL
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Only if it is no good, un-soldering it will compromise its hermetic seal.Could be a small tube they use to purge/gas fill the sensor, then cap it off. Try unsoldering the cap like end piece.
That's why it MUST be disassembled, so we can all know. Curious minds want to know....but can not for the life of me remember
Well, my curiosity got to me, and I did some further research. One of the NSN documents I found says it is a pressure output port, but not for what purpose. Possibly for a capillary to an actual pressure gage? The doc states "sensor shall have one pressure input connection, one electrical connection, and in some cases a pressure outlet connection".That's why it MUST be disassembled, so we can all know. Curious minds want to know....