sprag shifting 5 ton

[rizzo]

can anyone tell me what lines go where from the airvalve on the trans to the t-case and which line is the air supply line?

thanks

 

[rizzo]

bump

 

[rizzo]

bumpity bump bump

 

[Hookin1]

I can't help you rizzo,but you might pm davep...he has a few 5tons

 

[DaveP]

can anyone tell me what lines go where from the airvalve on the trans to the t-case and which line is the air supply line?

thanks

rizzo. i will look sat afternoon and let you know. i would do it in the am for you but i have to haul a truck home and will be leaving before daylight.

 

[Junkyard Wars Crusher]

I'm pretty sure this is what you are talking about -
I tried to add some notes to the pictures . . . but if you have any questions, fire away.


Are you planning to add a valve to make an "air-shift" transfer case???

 

[rizzo]

thanks jeff, but which line goes to which port on the t-case? and can you see where the fourth line goes. it looks like a vent.

 

[DaveP]

rizzo, on mine the front line on trans goes to the front port on t case. the middle line on trans goes to rear port on t case. the rear line on trans is the supply.

 

[Junkyard Wars Crusher]

I concur, my hose routing is the same as Dave's. (sorry, all those pics and I missed the basic question)

Not sure about the fourth line? There is a "springy-top" vent on top of the valve on the transmission. It's the same type of vent that you have on the axles.

 

[rizzo]

I concur, my hose routing is the same as Dave's. (sorry, all those pics and I missed the basic question)

Not sure about the fourth line? There is a "springy-top" vent on top of the valve on the transmission. It's the same type of vent that you have on the axles.

air valves have vents in them. so I figured that was it, but better safe than sorry.

thanks for the help guys!

 

[DaveP]

sorry, i forgot to id the vent port.