M1075
Active member
- 3,589
- 6
- 38
- Location
- Oklahoma City
RE: Too Big
I'm planning on attending. Not sure what to drive. TBD.
I'm planning on attending. Not sure what to drive. TBD.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Spring AROKMOTXKS rally
- Thread starter jasonjc
- Start date
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
RE: Too Big
Come on guys only 2 weeks left!! Talk with the pepole that run the park, they are waiting for us. It's a praivte park so NO tree huggers will be after us. They have mud pit if you want. They also have 40+ miles of trails anything from drit roads to had core off roading. Camping on site. All we need is trucks and pepole....
Come on guys only 2 weeks left!! Talk with the pepole that run the park, they are waiting for us. It's a praivte park so NO tree huggers will be after us. They have mud pit if you want. They also have 40+ miles of trails anything from drit roads to had core off roading. Camping on site. All we need is trucks and pepole....
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
RE: Too Big
IT'S THE WEEKEND AFTER NEXT!!!! WHO'S COMING?????????????
IT'S THE WEEKEND AFTER NEXT!!!! WHO'S COMING?????????????
- 2,037
- 221
- 63
- Location
- North West Arkansas
Next Weekend
Are we still on ? My "new" deuce just cleared it's EUC.
James
Are we still on ? My "new" deuce just cleared it's EUC.
James
Attachments
- 3,657
- 27
- 48
- Location
- Dallas, Texas
RE: Next Weekend
Are we having fireworks?
Are we having fireworks?
chuck500cc
New member
- 310
- 2
- 0
- Location
- DFW Area
RE: Next Weekend
I just bought a new truck "Dixie" when is the due date?
Chuck XD Fan
I just bought a new truck "Dixie" when is the due date?
Chuck XD Fan
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
RE: Next Weekend
It next weekend, come hell or high water. I just found a leaking axle seal and leaking wheel cylinder on my M109
And the shop door is too low to fit it in 
Got it all torn down , there is more grease in the axle tube than was in the hub. Its a good thing I found it to day the wheel brearing would not of lasted much long with out grease. It was "TI'D" by the army in '05 I don't think they did a good job. It now make's me glade I had it hauled home to start with.
It next weekend, come hell or high water. I just found a leaking axle seal and leaking wheel cylinder on my M109
And the shop door is too low to fit it in Got it all torn down , there is more grease in the axle tube than was in the hub. Its a good thing I found it to day the wheel brearing would not of lasted much long with out grease. It was "TI'D" by the army in '05 I don't think they did a good job. It now make's me glade I had it hauled home to start with.
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
Here are some maps to the park (I hope). I hope more show up than have spoken up. We have a 700acre park reseved just for us.
Attachments
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
JUST A FEW DAYS LEFT UNTILL THE RALLY 
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
Talked to the owner of the park today he can't wait to see us. I will be getting there Friday afternoon and leave sunday late AM early PM. I know there are more of steelsoldiers close by come on down and have some fun or just shoot the sh** let's put faces to name's.
- 3,657
- 27
- 48
- Location
- Dallas, Texas
I will possibly be there earlier on Friday.. depends on travel. Might have to get partway there and get a hotel, then the rest of the way. Maybe I am getting old.. 350 miles is about 5 or 6 hours.
I plan to take a fairly direct route but avoid the toll roads.
from dallas:
75 north becoming 69
cross I-40
cross I-44 at 45 degree angle
east on 60/69 through Vinita
crosses I-44 again
60/69 turns north and goes through Afton
60 northwest through Farland and past Wyandotte
south on 10
east (right) on E 160 road becoming southeast
south on N 670 rd.
east on E 166 rd.
south (right) on S cayuga rd.
southwest (right) on E 175 rd.
I think it is a driveway on/forking to the right.
I plan to take a fairly direct route but avoid the toll roads.
from dallas:
75 north becoming 69
cross I-40
cross I-44 at 45 degree angle
east on 60/69 through Vinita
crosses I-44 again
60/69 turns north and goes through Afton
60 northwest through Farland and past Wyandotte
south on 10
east (right) on E 160 road becoming southeast
south on N 670 rd.
east on E 166 rd.
south (right) on S cayuga rd.
southwest (right) on E 175 rd.
I think it is a driveway on/forking to the right.
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
The owner of the park also has an army surpuls store on hwy 60. I can't remember if it's befor or after 10.
- 3,657
- 27
- 48
- Location
- Dallas, Texas
700 acres.. heh that reminds me of getting turned around at a heavily wooded 1200 acre ATV park when the sun went down.. handheld no-frills GPS and compass got me back. For this reason that park (red river ("muenster") don't allow night riding. That, and drunks kept drving ATVs and dirt bikes off cliffs in the dark. I would like to map this one's boundaries and features out though. 600 acres can be done pretty easy. I did these Other places in Texas and OK:
http://www.bunkerofdoom.com/MAP/LAKE_MURRAY/INDEX.HTML
http://www.bunkerofdoom.com/MAP/RED_RIVER/INDEX.HTML
http://www.bunkerofdoom.com/MAP/ROCKY_RIDGE/INDEX.HTML
See y'all there Friday! p.s. be sure to bring a poncho..
http://www.bunkerofdoom.com/MAP/LAKE_MURRAY/INDEX.HTML
http://www.bunkerofdoom.com/MAP/RED_RIVER/INDEX.HTML
http://www.bunkerofdoom.com/MAP/ROCKY_RIDGE/INDEX.HTML
See y'all there Friday! p.s. be sure to bring a poncho..
BigJay
New member
- 113
- 0
- 0
- Location
- Cave Springs, AR
Well it's not looking good for me. We just got our house a couple weeks ago.. Been moving like crazy. I brought my Suburban to the house the first day but hadn't had a chance to look at it. (It's been sitting in a field since June). Fired right up (always does), ran down the road good, but the brakes sucked. Looks like the left rear wheel cylinder is blown. My transfer case has been screwed up (chain slipping), but that wouldn't have stopped me from attending. I got a welded rear diff, a winch, and y'all got deuces.
So... if I can get the wheel cylinder changed tomorrow I will try and pop up there on Saturday. If not, then I'll have to wait 'till next year.
-Jay
So... if I can get the wheel cylinder changed tomorrow I will try and pop up there on Saturday. If not, then I'll have to wait 'till next year.
-Jay
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
Bigjay just go down to your PD and get there Deuce. Next weekend there will be a MV convoy rolling through Cave Springs on saturday with 20-30 MV. So keep a eye out. http://www.armvpa.com/red_ballin.htm
- 3,657
- 27
- 48
- Location
- Dallas, Texas
it begins..
Thanks to Gary Polverone for the signage!
Thanks to Gary Polverone for the signage!
Attachments
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
Well I'm getting packed up too. Hope too see a bunch of you all there.
- 2,037
- 221
- 63
- Location
- North West Arkansas
On the way
Jason:
Couldn't arrange to pick up my new Deuce, so I packing up the M715 Contact Maint. Truck, you never can tell we may need a welder as well as the gen set the way the weather is looking.
James G.
Jason:
Couldn't arrange to pick up my new Deuce, so I packing up the M715 Contact Maint. Truck, you never can tell we may need a welder as well as the gen set the way the weather is looking.
James G.
RE: On the way
hey guys thought I'd ask I'm not sure whether I should show up or not. As I don't have a MV(yet), and didn't know if I would be in th way. If this is a event geared more for people with a MV. I just didn't want to drive all the way up there only to be in the way. My college budget just doesn't allow me to have a MV at the moment.
hey guys thought I'd ask I'm not sure whether I should show up or not. As I don't have a MV(yet), and didn't know if I would be in th way. If this is a event geared more for people with a MV. I just didn't want to drive all the way up there only to be in the way. My college budget just doesn't allow me to have a MV at the moment.