tomcava
Member
- 36
- 0
- 6
- Location
- North Georgia
Looking for the most complete stencil kit for a M1028. I see one on ebay for $25. Is that a decent set? Or maybe someone has a used set on the cheap?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Stencils
- Thread starter tomcava
- Start date
- 9,604
- 1,491
- 113
- Location
- mid- michigan
EvilDr.Porkchop sells them in the vendors forum.
[h=1]Oilboard Stencils for Military Vehicles (1/4",1/2",3/4",1", and 1.75" characters)[/h]
[h=1]Oilboard Stencils for Military Vehicles (1/4",1/2",3/4",1", and 1.75" characters)[/h]
tomcava
Member
- 36
- 0
- 6
- Location
- North Georgia
Thanks bud - great idea. On order.
- 9,604
- 1,491
- 113
- Location
- mid- michigan
EvilDr.Porkchop is a really good guy to deal with.
ageregunner
Active member
- 705
- 88
- 28
- Location
- Breinigsville, PA
Had great experience dealing with Evil Dr. Porkchop. Great product at a reasonable price.
Warren Lovell
Member
- 476
- 4
- 18
- Location
- SAN DIEGO, CA
use magnets to hold stencil in place...
I used Airbrush artist Frisket Film- It has a lightweight adhesive that really clings so you don't have to worry about bleeds under the stencil. You can use the appropriate camo font, stars, etc. Scale to size, print and save the file. For future touch-ups. I ended-up shifting the print image across two sheets and taping them together before carefully cutting the stencil with an X-acto knife. Peels off cleanly.