• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Sticky window zippers? Solution..

ida34

Well-known member
4,120
33
48
Location
Dexter, MI
When I was in we used a soap bar but this would look better. Do you get it locally? If so, where?

Chuck
 

kawkev

Member
140
2
18
Location
Picayune, Ms
Candle wax works good. Bees wax works better. Rub a little onto zipper teeth, then run the zipper up and down a couple of times and clean off any excess wax.
 

m1010plowboy

Well-known member
Steel Soldiers Supporter
3,909
2,713
83
Location
Edmonton, Canada
....and once you get them lubed.... a little squeeze with some needle nose pliers or a spread with a tiny screw driver will get the spacing on the blunt end of the slider re-set for a smooth pull. They tend to widen out and the proper spacing improves mileage.

http://www.toolpak.com/html/INFOZipperAdjustment.html

They are suggesting "Food Grade Silicone" just in case you undo the zipper with your teeth.
 

papakb

Well-known member
2,285
1,185
113
Location
San Jose, Ca
The military used to issue beeswax in a paper wrapped like an overgrown crayon. Worked wonders, cheap, and available almost anywhere.

Kurt
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks