• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Still not fixed

Isaac-1

Well-known member
1,970
50
48
Location
SW, Louisiana
Just wanted to let you know your not alone, I just installed my SX460 today and the magic smoke escaped i the same place. The bad part is I still don't know why, unless it was just a defective voltage regulator, I am going to order another one and study the wiring diagram some more.

Ike
 

ka25

New member
5
0
0
Location
wesy babylon/new york
replace it with sx460, follow Isaac1 instructions, dont 2 amp fuse onf2, used 5 amp on terminal 27. i just done mine it works fine , check 120 with a meter its all good.
 

padolin

New member
31
0
0
Location
Poca WV
well, i think since i have the original VR, and it obviously wasnt the problem, i think im going to put it back on and see what happens.... ive already fried one SX460
 
Top