- 34,012
- 1,810
- 113
- Location
- GA Mountains
If anyone has done this, how hard was it to repair the back of the cab? I know cucvrus has done a few. Mine isn't selling so thinking of stripping off the body.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Stripping the box off of an M1010
- Thread starter Recovry4x4
- Start date
- 3,753
- 1,532
- 113
- Location
- North Carolina - FINALLY !
Can probably get a nice cab back up here from Jim Henry
- 34,012
- 1,810
- 113
- Location
- GA Mountains
Err, don't think I want to do a cab change. Just pondering.
- 3,753
- 1,532
- 113
- Location
- North Carolina - FINALLY !
No just a back wall
- 34,012
- 1,810
- 113
- Location
- GA Mountains
That might work.
- 2,130
- 84
- 48
- Location
- Maine USA
I have done one, I cut the back out of a donor cab, at the time I had no welding equipment and used rivets. The frame has extensions welded on just cut at the weld the holes for the original bumper are there I used a CUCV pickup rear bumper it bolted right on. A couple of years after I did it I regretted it and ended up buying another 1010 and just recently sold it and replaced it with a M886. The only details I don't recall was the fuel fill, I know it lined up with the pickup bed but I don't recall if I had to replace the filler hose.