- 10,458
- 6,532
- 113
- Location
- Camp Wood/LC, TX
I need to order some of this, but have never seen any. McMaster has 5/16 and 7/16. Which should I buy? Any other sources besides Eriks?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Super Rope diameter?
- Thread starter NDT
- Start date
- 2,811
- 41
- 38
- Location
- Mt. Eden, KY
I have gotten the 5/16 from McMaster Carr. It is the correct diameter. Make sure you order the EPDM cord.
Last edited:
I did all this footwork, check this post. http://www.steelsoldiers.com/showth...o-know-about-rubber-rope&highlight=super+rope
- 10,458
- 6,532
- 113
- Location
- Camp Wood/LC, TX
Thanks ya'll. Not sure why your thread Gunzy does not show up when you search "super rope".
Amer-team
Well-known member
- 1,707
- 32
- 48
- Location
- Centralia/WA
5/16 is the correct original size. Gunzy did some good work on this. I ended up at the local trucker supply store and went with the 3/8 that they had in stock. Took candle wax and waxed the holes in the tarp and the 3/8 worked like a champ. I just replaced the ones that were bad for about .35 per foot. So it cost about 2 bucks to do the two bad ones. i bought a little extra and can go to the store when i need more.