super single wheels and tires

[venom8343]

Hi all, where can i find super single wheels for my deuce. I hate the duals. Also I'm wanting 14.00x20 goodyear tires. Will they fit on the back without rubbing together? Any info is greatly appreciated.

 

[M1075]

14.00x20 is too big

 

[Chevytruck]

i'm assuming that you know you have to flip the hubs to make the rears run in track with the front.

if not
M35 DUALS TO SINGLES CONVERSION
Cranetruck did that

I'm sure others will chime in on this
Good luck on your quest!

maybe 11.00R20 XL's might fit

 

[nk14zp]

od iron marsh or build your own rims.

 

[BKubu]

James is correct...1400s are too big for a deuce.

 

[tjcouch]

mine are from www.odiron.com

More pictures here tjcouch.com » Blog Archive » Pictures of the big truck

 

[GoHot229]

In Duce 'WICI' you can see a fiew combos that work and some that require mod's like lifting or.....

 

[baxter]

TJ what size tires are you running

Vaughn

 

[jrou111]

TJ what size tires are you running

Vaughn

IIRC, He's running 395/85/20

 

[bigelk50]

venom8343 Go with some 1200 or 1250x 20's I have seen them on a deuce before and they look great! I think that I recall a guy in WI selling tires and wheels for cheap. I know he has the 1100x20s.

 

[yeager1]

How much $$$ are OD iron wheels? Shipping?

 

[venom8343]

Hey thanks guys. I love the wheels and tires that are on tjcouch truck and yall say he is running 395x85x20, thats looks like the biggest tire you can fit without rubbing together. Does anyone know the exact, for sure, running them on your truck, the biggest in the xx.00-20 measarment? And I wish i knew how to build my own wheels....lol

 

[flighht2k5]

14.00x20 is too big

Im pretty sure my buddy has 14.20's on his deuce

 

[M1075]

Im pretty sure my buddy has 14.20's on his deuce

I have never seen 14R20 on a stock deuce. 14.5R20 will work though.

 

[M1075]

Hey thanks guys. I love the wheels and tires that are on tjcouch truck and yall say he is running 395x85x20, thats looks like the biggest tire you can fit without rubbing together. Does anyone know the exact, for sure, running them on your truck, the biggest in the xx.00-20 measarment? And I wish i knew how to build my own wheels....lol

15.5R20 is the largest tire that will fit (of those that are found in reasonable quantities as surplus in the US)

 

[tjcouch]

IIRC, He's running 395/85/20

Correct.

I make it a point to forget how much I pay for modifications to my toys, otherwise I would likely stop.

I have the fortune to be in the same state as www.ODIron.com , so shipping was how ever much fuel I burned in the tow vehicle.

The tires weigh 240# , the wheels . . . . ummm another 80#?

 

[venom8343]

Flighht if you would, find out for sure for me..thanks. And i heard that the XX.50R20's are shorter and wider. So we know that the 15.50R20's will fit. Now what is the biggest ones in the XX.00R20? Sorry for asking so many questions, I just want the biggest tire i can fit without buying a set thats to big!

 

[tjcouch]

he is running 395x85x20, thats looks like the biggest tire you can fit without rubbing together.

True. That is the biggest you can go . . . .and I have flexed it off-camber on the trails w/o worries.

I have no complaints with my set-up. I whole-heartily recommend it.

Again - pay careful attention to the last two pics in this post, they show the font axle fully compressed. http://tjcouch.com/?p=447

 

[venom8343]

got damn tj, your truck looks so bad ass with those tires. I am very jelous..lol

 

[flighht2k5]

Flighht if you would, find out for sure for me..thanks. And i heard that the XX.50R20's are shorter and wider. So we know that the 15.50R20's will fit. Now what is the biggest ones in the XX.00R20? Sorry for asking so many questions, I just want the biggest tire i can fit without buying a set thats to big!

Ill ask him on Tuesday.