Super Singles Pics + info needed

[biodeucel]

Anyone have any good pics of super singled dueces?
for the record, what is the max size tire w/ singles without rubbing
and the max size without rubbing if the suspension is maxed out.

note: I DID search for "super singles" and looked though pages upon pages of posts in both the deuce hot rodding, the deuce, and members rides forums. Not too many pics that i could see.

 

[DanMartin]

There should be lots of info.

Here's the page from the pics area: http://www.steelsoldiers.com/index.php?module=photoshare&func=showimages&fid=100

Here's my pics: http://s214.photobucket.com/albums/cc162/dantheman29a/Tires/

Tons of threads on sizing and whatnot...looks like 15.50s are about it for a deuce, and then I would expect rubbing at high axle articulation. 14.50s are the best looking and behaving IMO.

 

[gringeltaube]

More 15.5s here: http://shortlinks.net/cra406
or here: http://shortlinks.net/qhd598
or......

G.

 

[tjcouch]

Here are mine, purchased from www.ODIRON.com

 

[biodeucel]

nice trucks everyone. Dan, I swear i looked through the photo area twice and did not notice that folder. Must have been distracted by the jeep w/ tires on steroids.

We really should have sub-forums as a way of orginizing posts on super singles, bobbing, exhaust, turbos, etc. Would be better than looking through 47 pages of this-is-not-what-im-looking-for

 

[russ81]

Nice looking truck!

They look so much better with an aggressive tread and singles.

 

[gringeltaube]

[quote="biodeucel" ....We really should have sub-forums as a way of orginizing posts on super singles, bobbing, exhaust, turbos, etc. Would be better than looking through 47 pages of this-is-not-what-im-looking-for [/quote]

I like your idea, at least for the Deuce Mod. & OR section. One would be about wheels and tires, another one for powerplant & drivetrain mods, one for the bobbed...
Anyways once you get used to the search function you will find what you want much quicker!

G.

 

[cattlerepairman]

TJCOUCH.....***DROOL***

 

[vtach]

I need to get some better snow traction than my worn 9.00 duals ASAP. Can someone give me a source for tires and or rims? What is the most cost effective route, singles? Can this be done for less than $1500.00?

 

[vtach]

Maybe some Michelins XZs in 11.00 or 12.00s in singles and use my stock rims??

 

[jblack6527]

I would say that the cheapest way would be to get some 11.00 and single it out.

 

[avengeusa]

that truck looks awesome, so what does it cost for wheels and tires like that?

rough estimate

 

[gringeltaube]

If you mean tjcouch's truck ask Mike (devilman96) for a quotation. PM him or e-mail: mike@odiron.com

G.

 

[Alredneck]

It depends on what rims you use. 14.50s are the easiest goin with out probs, 395s / 15.5s ( 46s ) will fit, if you put them on the stock split rim the rub in the front on hard right hand turns and under extreme articulation. If you get some wheels like Odiron sells then they wont rub while turning, but not sure about articulation. look up " Apoc ready to plunder and pilage in the deuce hot rod forum.

 

[Jakob]

I like your idea, at least for the Deuce Mod. & OR section. One would be about wheels and tires, another one for powerplant & drivetrain mods, one for the bobbed...
Anyways once you get used to the search function you will find what you want much quicker!

G.

That's a pretty good idea. I've been to some other sites that are the same way and it works really well. The Deuce Mod section has a lot of content. It'd be much more user friendly if there could be some sub-forums for the more popular topics - Wheels/Tires, Exhaust and Bobbing just to name a few (and probably the most popular).

 

[pigpenkiwi]

were is best place to by super singles i live in oregon

 

[tm america]

i got my 15.5s for 100 per tirethey were 95 to 100% tread they dont hit in the back just hit the drag link at full turn to the right

 

[baxter]

TM who did you get your tires from if you dont mind telling.
vaughn

 

[tm america]

i got em from a guy named rodney in wis.about a half hour past the dells he had thousands of em .he had 53s 48s and 46s new and used

 

[shootiniron]

I've got 14.50's on the stock rims and they work well together,mounted them myself,kind of a pain but doable.Got the tires from Mark Riddle(100dollarman),he lurks around here from time to time.