-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Switching to LED bulbs
- Thread starter shanebaby
- Start date
- 3,265
- 3,395
- 113
- Location
- NORTH (Canada)
Depends upon which flasher unit you have. If it is a relatively new one, they have an internal resistor and work fine with LED bulbs. The older ones not so much. On the other hand, the newer flasher units are garbage and don't last. If you want to go all LED, the easiest way is to spend a whopping 30-40 bucks and make your own stock-looking flasher unit, using a cheap modern flasher relay. I have all LED on my truck and it works very well. Go Clinto!
https://www.steelsoldiers.com/showthread.php?134679-M-series-flasher-relay-civvy-conversion-how-to
https://www.steelsoldiers.com/showthread.php?134679-M-series-flasher-relay-civvy-conversion-how-to
Last edited:
peashooter
Well-known member
- 1,038
- 205
- 63
- Location
- Hanover, minnesota
Be carefull with the Led route. They arent all as worry free as we tend to think they are. Many of is have had lots of problems with them and short lifespans. Read this before spending too much money on the LED project anyway: https://www.steelsoldiers.com/showt...e-of-the-day&p=1573838&viewfull=1#post1573838