T136 transfer case

[Pappa]

Does anybody know if the transfer case rear output bearing can be replaced without pulling and disassembling the case.
Thanks

 

[NDT]

I don’t think you will have much luck pulling the tapered roller bearing off the shaft with it buried in the case. It’s an interference fit.

 

[Pappa]

I don’t think you will have much luck pulling the tapered roller bearing off the shaft with it buried in the case. It’s an interference fit.

I don’t think you will have much luck pulling the tapered roller bearing off the shaft with it buried in the case. It’s an interference fit.

The bearing is shot. I
think I'll be able to get the inner race off the shaft, what I'm wondering is if the outer race can be removed once the seal retainer and shims are removed