FSBruva
New member
- 629
- 1
- 0
- Location
- Marietta, GA
YEP!! And I'll bet they'll pull the whole lot if the bidding stays below 3K a pop!!!!
Matt
Matt
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
The A-frame kit (hoist) for M35-let's talk about it
- Thread starter clinto
- Start date
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Speaking of lots, theres quite a lot selling at Homestead right now. About 7000# of Tentage. Might be bidding on that!
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,596
- 1,129
- 113
- Location
- Athens, Ga.
Well, if they're that rare, I will build my own, although I agree with SixBuy, I'd like to see what the military thought was a good idea..
Building my own allows me to modify it to my needs, such as making it longer in order to clear the roof….
Building my own allows me to modify it to my needs, such as making it longer in order to clear the roof….
CGarbee
Well-known member
- 2,472
- 552
- 113
- Location
- Raleigh, NC
I wish that somebody had told me at the rally... It would have looked real nice on my Cummins powered M37...
- 12,195
- 320
- 0
- Location
- gainesville, ga.
we had some in nam, plus we made our own
rdixiemiller
Active member
- 1,760
- 3
- 38
- Location
- Olive Branch Mississipi
Dad said they used one at a forward airstrip to do an engine change on his C-123. He picked up some flak and lost an engine. they flew in another engine and a couple of mechanics. The Army guys provided a deuce with an A-frame to help change it out. It must have been a fairly tall A-frame, the 123 is like the 130, high wing. This was in 1969 at some un-named airstrip in Viet Nam.
SixBuy
New member
- 226
- 1
- 0
- Location
- Dallas/Texas
Is it too early to put in for one (1)?
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,596
- 1,129
- 113
- Location
- Athens, Ga.
Well, if anyone is interested let me know and I will talk to a friend of mine who is a genuis in fabrication. If it's feasible ($$$) he'll know how to do it and he knows how to calculate load capacities and all the technical stuff that goes into a project like this.SixBuy said:
Towerguy1
New member
- 405
- 1
- 0
- Location
- Central Maine
Looks like a fun project, Maybe this summer Ill build one. Ive got most of the stuff handy already.
rizzo
Active member
- 2,841
- 8
- 38
- Location
- Port Huron, MI
I used my towbar for one...sort of
Attachments
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Genius Kevin! I like the liberal use of multiple vehicles.
mangus580
New member
- 6,010
- 282
- 0
- Location
- Western NY
I have considered something like that with my towbar. I just dont think I could trust my control of the deuce winch for lifting like that. Of course, maybe thats why you used the 4wheeler winch!
mdlbldrmatt135
Member
- 298
- 8
- 18
- Location
- Olean Ny
If anyone wanta actual Blueprints (and the have some dimensions) let me know... I'm a Design Drafter by Trade......
guner51
Member
- 153
- 0
- 16
- Location
- Metamora, Illinois
front boom
I used the long boom supports off a wrecker for mine and bolted a steel plate and saddles on top and make a top to bolt them together with a snatch block off a wrecker.
I put it on a m51 .
I used the long boom supports off a wrecker for mine and bolted a steel plate and saddles on top and make a top to bolt them together with a snatch block off a wrecker.
I put it on a m51 .
Barrman
Well-known member
- 5,254
- 1,761
- 113
- Location
- Giddings, Texas
Here is my stock tow bar with a shackle on the lunette loop. Since I don't have any body on my M35 I just hooked the chain that holds it up to the little "handles" on the side of the frame above the front axle.
The only problem with this method is the winch cable hits the top cross brace on the winch and bends it if you have the A arm too high. but, it was high enough to set a spare set of M715 axles on the back of my parts M35 frame.
I did the same set up a few weeks ago to pick up a spare M35 cab and put it on a trailer.
Oh, that is me driving and Agengr assisting.
The only problem with this method is the winch cable hits the top cross brace on the winch and bends it if you have the A arm too high. but, it was high enough to set a spare set of M715 axles on the back of my parts M35 frame.
I did the same set up a few weeks ago to pick up a spare M35 cab and put it on a trailer.
Oh, that is me driving and Agengr assisting.
Attachments
No.2Diesel
New member
- 1,264
- 11
- 0
- Location
- Huntington, NY
Hi,
This is an excerpt from one of the 5Ton Assembly TMs in .pdf format. It should give you an idea of whats involved. Too bad the parts list doesn't describe dimensions whatsoever.
This is an excerpt from one of the 5Ton Assembly TMs in .pdf format. It should give you an idea of whats involved. Too bad the parts list doesn't describe dimensions whatsoever.
- 3,021
- 221
- 63
- Location
- eldersburg maryland
what was on the pipe line trucks??
- 574
- -21
- 18
im pretty good with fabbing stuff up, i was thinking about doing one of these setups cause i have quite a few things to move around the yard with a hoist aparatus like this one in question. i cant figure out an easy way to get the A frame in the upright position. it doesnt seem that hard until you actually go to do it. pipe is pretty heavy. i thought about just trying to pull it up withthe winch but i think that would just end up giving you a tight winch line and breakin a shear pin or worst case scenerio, loading tension and then on the A frame and then it goes flying upwards and crashes into the truck. since it seems hard to upright i would end up leavin it ont he truck and not driving it cause im to lazy to take the A frame off 
- 3,585
- 7
- 0
- Location
- Parkville, MD
Getting the A frame up
I think a quality come along would do the job we used two to stablilze the fifth wheel here in this shot but my real desire is for a 4K rough terrain forklift to do the lifting.
See the ease this forklift did in the same job Rizzo had to rig to do
I think a quality come along would do the job we used two to stablilze the fifth wheel here in this shot but my real desire is for a 4K rough terrain forklift to do the lifting.
See the ease this forklift did in the same job Rizzo had to rig to do
Attachments
Regarding the cable and hardtop clearence,why not put a standoff/extension in the back where the cable contacts the bed from the pintle, by raising the rear of the cable about 12-14" it should clear the cab. I wonder if the tailgate has to come off to run the cable to the pintle? Also I would think the pintle should be turned 180o so the solid jaw takes the weight instead of the hinged one