-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
The infamous Well Nut info
- Thread starter Daybreak
- Start date
dstang97
Well-known member
- 1,859
- 31
- 48
- Location
- Clover, SC
Are these nos? Or aftermarket no name?
I don't know what you mean by aftermarket no name. I purchased them from a military supplier rerfered to me by a fellow member here. They are current manufacture, not old and cracked if thats what you mean. These are milspec parts.
dstang97
Well-known member
- 1,859
- 31
- 48
- Location
- Clover, SC
Milspec is what I'm looking for. Thanks
Howdy,
YES, member Chrispyny has the true correct Well nut A-3816 NSN 5310-01-197-1473
Yes, these are made with nitrile rubber (Buna-N) and are diesel fuel compatible.
Tech Info
THREAD CLASS 2B
FLANGE THICKNESS 0.190 INCHES NOMINAL
NUT DIAMETER 0.750 INCHES NOMINAL
NUT LENGTH 1.060 INCHES NOMINAL
THREAD SERIES UNC
THREAD QUANTITY PER INCH 16
NOMINAL THREAD SIZE 0.375 INCHES
SPECIAL FEATURES SLEEVE MATERIAL IS NITRILE; THREADED INSERT MATERIAL IS BRASS
Last edited:
Howdy,
Any tube or drain will use a well nut to seal the opening. Any time you have a fuel leak, it will be the well nut.
Not all well nuts are the same. You want this one made with Buna N nitrile rubber because of the contact with diesel.
Any tube or drain will use a well nut to seal the opening. Any time you have a fuel leak, it will be the well nut.
Not all well nuts are the same. You want this one made with Buna N nitrile rubber because of the contact with diesel.
- 3,860
- 6,074
- 113
- Location
- MA
You still have 2? I don't need one... yet. But it might be cheap insurance to put on the shelf.
Zebcorod
Member
- 37
- 0
- 6
- Location
- Montgomery, Alabama
I just discovered a leaking well nut at the bottom drain location on my MEP 802A. Thanks for the information on this thread to help get me on the right track to repair it.
Lawman21
New member
- 35
- 0
- 0
- Location
- California
Thanks Mike.
Anyone have a problem ordering from green mountain generator? I've left 3 messages regarding ordering replacement parts. No one has returned my calls. Frustrated.
Eric
Anyone have a problem ordering from green mountain generator? I've left 3 messages regarding ordering replacement parts. No one has returned my calls. Frustrated.
Eric
dstang97
Well-known member
- 1,859
- 31
- 48
- Location
- Clover, SC
Good luck with that. He will respond 2 years from now. In this thread.
Lawman21
New member
- 35
- 0
- 0
- Location
- California
So is that a yes?
Another Ahab
Well-known member
- 18,007
- 4,579
- 113
- Location
- Alexandria, VA
That company has an interesting business model.
Wonder what growth strategy they have behind that.
Lawman21
New member
- 35
- 0
- 0
- Location
- California
Where is another reputable place to order parts?
Howdy,
It depends on what parts are needed? Right here is a great source for stuff.
Lawman21
New member
- 35
- 0
- 0
- Location
- California
Sorry new to all this. People asking me to start new threads and posts. Trying to get this site down..looking for a well nut for a MEP-802a
Lawman21
New member
- 35
- 0
- 0
- Location
- California
Mike,Howdy,
see private mail.
What is your address so I can send you money for the well.nuts.
Eric
Zebcorod
Member
- 37
- 0
- 6
- Location
- Montgomery, Alabama
- 16,920
- 24,537
- 113
- Location
- Burgkunstadt, Germany
Your getting it. Don't worry. In a short while you will be an old hand.
JohnDGilmer
New member
- 3
- 0
- 1
- Location
- wrightstown/nj
Does anyone know where i can get a well nut for a MEP 803A