Doug D.
Member
- 51
- 27
- 18
- Location
- Winterville Ga
i have read a lot about these Thermostatic fan sensors not being very good. Can someone tell me the best one to get? Where i can get it?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Thermostatic fan sensor
- Thread starter Doug D.
- Start date
- 7,016
- 9,689
- 113
- Location
- Papalote, TX
Welcome to the forum!
Are you having issues with your fan?
Are you having issues with your fan?
- 5,635
- 2,953
- 113
- Location
- Metairie/La (N'awlins)
An original equipment AMG part from authorized dealer Kascar, Mac motors etc
No chinacom from ebay or amazon....
AMG does sell some items direct. You would need to check their website if they sell it.
No chinacom from ebay or amazon....
AMG does sell some items direct. You would need to check their website if they sell it.
Doug D.
Member
- 51
- 27
- 18
- Location
- Winterville Ga
Yea I replaced the thermostat and checked the Cadillac valve by unplugging it. Fan engages when I unplug it. When it heats up though it will not come on.
- 7,016
- 9,689
- 113
- Location
- Papalote, TX
Unplug one the wires to the temp switch, it is a failsafe system, the fan should come on.
EDIT, if the fan comes on ether the switch is bad or you are not getting it hot enough, if the fan does not come on look at the TDM module.
EDIT, if the fan comes on ether the switch is bad or you are not getting it hot enough, if the fan does not come on look at the TDM module.
Last edited:
- 3,003
- 4,420
- 113
- Location
- Olympia/WA
Verify with a laser thermometer that your gauge is reading accurately.
The gauges are notorious for being innacurate.
That being said, when my temps were above what they were supposed to be, it was a failed TDM (Time Delay Module)
The gauges are notorious for being innacurate.
That being said, when my temps were above what they were supposed to be, it was a failed TDM (Time Delay Module)
Doug D.
Member
- 51
- 27
- 18
- Location
- Winterville Ga
thanks for all the info!