Asmoday
Member
- 225
- 0
- 16
- Location
- Los Angeles, CA
Hello...Glad to be back on the forum after a break...!
I'm hoping someone can give some install tips and suggestions. I'm looking to install a relay that's timed and controlled by a remote (like a car alarm fob) as a anti theft device. I would like to set it up so that in order to crank my M1009 one would have to hit the remote which would trigger a relay for say 20 seconds in order to crank and start. After the timed delay one could no longer crank the engine over without resetting the relay again.
I've seen setups where you have to put a microchip fob close to a spot on the dash in order to start the vehicle and if you don't start it within a short time it won't start.
Does anyone have any suggestions on the best way to do this?
Thanks...!
I'm hoping someone can give some install tips and suggestions. I'm looking to install a relay that's timed and controlled by a remote (like a car alarm fob) as a anti theft device. I would like to set it up so that in order to crank my M1009 one would have to hit the remote which would trigger a relay for say 20 seconds in order to crank and start. After the timed delay one could no longer crank the engine over without resetting the relay again.
I've seen setups where you have to put a microchip fob close to a spot on the dash in order to start the vehicle and if you don't start it within a short time it won't start.
Does anyone have any suggestions on the best way to do this?
Thanks...!