Torque converter stuck on engine....

[86m1028]

Yes but that becomes poor practice when you hit the TQ hub on something as the transmission comes down. Not to mention it is an awkward one man job to pull the TQ by itself. Comes out pretty easy and fool proof inside the bellhousing, especially when the trans is already tipped back. Just keep one hand on it to keep it from sliding forward.

Totally agree with you there....

I was just saying "it is do able"

 

[rtk]

Exactly !

 

[86m1028]

Best way to tell if converter is fully seated is when trans is reinstalled,
trans is flush with engine block, there will be a gap between converter & flex plate.
when bolting converter to flex plate the bolts will "pull the converter to the flex plate.