Trailer bolt pattern

[paramilusmc]

Are any of the smaller trailers (M416/M100 type) that have the same 5 bolt hole pattern as the M1009 CUCV?

If not anyone done a project like this?

 

[Warthog]

Are any of the smaller trailers (M416/M100 type) that have the same 5 bolt hole pattern as the M1009 CUCV?

If not anyone done a project like this?

The M1009 has a 6 bolt pattern.

Unaware of any military trailer that has this pattern.

 

[Bob H]

aren't the 416's the same as the M151 wheels?????????????

 

[wreckerman893]

The 416 tailers were usually pulled by a M151 and had the same bolt pattern.

The older 101 style trailers had the same bolt pattern as the M37 and were often pulled by them.

I think some of them were refitted with axles that had the same bolt pattern as the 5/4 ton pickups.

But my memory is fuzzy sometimes.

 

[gringeltaube]

5 on 5-1/2" Bolt Circle: M38; M100; M151; M170; M416
6 on 5-1/2" Bolt Circle: M1009

G.

 

[Barrman]

The early 101 trailers never got the same bolt patter as the M715. There was an adaptor made to mount the M715 6 lug on the M37 pattern trailer though. Only used 3 lugs on each side. Not really something you want to go far with.

People have put different hubs on 416 trailers so they match up with Jeep's. I haven't seen or researched doing the same for the 1009 pattern. I guess with the proper bearing sizes and spare hubs it could be done. Probably have trouble getting the brakes to match up as well.

 

[paramilusmc]

Thanks for clearing that up, haven't seen my M1009 in 8 months.

I would like to use the same wheels and tires on a trailer to accommodate both truck and trailer in case one goes down.

 

[paramilusmc]

Found this online, actually recommended to me. Anyone know if it will fit the CDN M101?