- 2,037
- 221
- 63
- Location
- North West Arkansas
Where do you fill the transfer case on a 543A2 wrecker??? I hope it is not on top since I don't have the crane working yet!
James G.
James G.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Transfer Case on a M543A2 Wrecker
- Thread starter rumplecat
- Start date
- 2,037
- 221
- 63
- Location
- North West Arkansas
Sorry about the second post must have been a double tap?
James G.
James G.
Gamagoat1
Active member
- 746
- 44
- 28
- Location
- Kiowa, Colorado
Just below the front output shaft on the driver's side. 90 wt. approx. 51/4 quarts.
Towman2277
New member
- 507
- 0
- 0
- Location
- Saraland, Alabama
It's not hard (too hard!) to get to.
jasonjc
Well-known member
- 5,326
- 290
- 83
- Location
- Gravette Ar.
Get a 5gal bucket with a pump its the easyset thing to do.
- 2,037
- 221
- 63
- Location
- North West Arkansas
We have rigged up a large deep funnel with a long piece of 3/4 clear tubing. Feed the gear lube in from the bed and let gravity do the work. I hope we can get some angle on the t-case opening. It seems they have drained everything on the wrecker so we are getting some speed training on refilling everything before Tysons get tired of us taking up their space.
James G.
James G.