• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Transmission Filter

Doug D.

Member
51
27
18
Location
Winterville Ga
Can anyone give me correct part number for the transmission filter? I have a 2005--- M1114 with 4 speed overdrive. Also what should i use as fluid in trans and transfer case?
Also read something about adding Lubegaurd Red ATF Protectant with the trans fluid. Thanks to all of you for your help!
 

frauhansen

Well-known member
Steel Soldiers Supporter
276
538
93
Location
switzerland
This should be the NSN 4330-01-496-5720.
And it is the transmission OIL filer... you not filtering the transmission ;-)
Dextron III is prescribed as ATF.
In my opinion, no additives or special oils are needed.


 

FlameRed

Well-known member
Steel Soldiers Supporter
348
538
93
Location
Florida
:ditto:

I have used the Lubegard Shudder fix on the A8 GM tranny for other problems on another platform and it did work. But just use straight ATF here.

A couple of pointers.

  • If you don't have a pan with a drain, which you should, now is the time to add one!
  • I could not find any Dextron 3, so I used what was readily available, which was Dexron 6 and no problems.
  • I think the civi filter is identical but I am sure someone will chime in that is not the case. Compare them and see if the HUMVEE Tax is worth it.
  • The gear box uses the same tranny fluid, as the cooling system goes through both.
 

TOBASH

Father, Surgeon, Cantankerous Grouch
Steel Soldiers Supporter
Supporting Vendor
3,596
3,518
113
Location
Brooklyn, NY
Walmart and AutoZone had Dex III last week when I bought some.
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
7,017
9,695
113
Location
Papalote, TX
:ditto:

I have used the Lubegard Shudder fix on the A8 GM tranny for other problems on another platform and it did work. But just use straight ATF here.

A couple of pointers.

  • If you don't have a pan with a drain, which you should, now is the time to add one!
  • I could not find any Dextron 3, so I used what was readily available, which was Dexron 6 and no problems.
  • I think the civi filter is identical but I am sure someone will chime in that is not the case. Compare them and see if the HUMVEE Tax is worth it.
  • The gear box uses the same tranny fluid, as the cooling system goes through both.
While it is true the transmission coolant goes through the transfer case they do not mix, unless the cooler in the transfer case is bad then you will have other problems, so you can use different fluids in each, IE DEX VI in the trans and DEX III in the transfer case, Personally I use DEX III in all three HMMWV applications, trans,transfer,steering as it keeps things simple and some folks have had issues with DEX VI in the steering system
 

TOBASH

Father, Surgeon, Cantankerous Grouch
Steel Soldiers Supporter
Supporting Vendor
3,596
3,518
113
Location
Brooklyn, NY
Eric Hummer H1 just capped that transfer case cooler.

He has almost 300,000 miles, including Death Valley in the Summer. Guess it’s ok
 
Last edited:

juanprado

Well-known member
Steel Soldiers Supporter
5,635
2,953
113
Location
Metairie/La (N'awlins)
O" reillys also sells Dexron 3 in their brand in the gallon.

I have a nos filter reasonable if interested as I do not have a 4spd. Send me a pm
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks