Troop Seat Clamps?

[rumplecat]

It looks like all I needed for the troop seats for my M1008 came in the back of the last 813 I purchased everything except the CLAMPS, is there a reasonably prices source for these?

PAOZZ 19207 12255609 CLAMP ASSEMBLY,SEAT TROOP SEAT TO​

SIDE BOARD STAKE WELL

NSN 2540-01-026-3049

 

[Bob H]

I'll dig tonight, someone on here from NJ I think has a set for the CUCV
They are slightly different than the M880 ( I made a set myself for the M880)

 

[rumplecat]

Even a photo and some dimensions would help, just in case?

 

[Bob H]

Here is the sketch for the M880, all six are the same size.
The CUCV has 4 one length and 2 another.
Look at the sketch, specifically the 6 1/8 dimension.
The top goes over the troop seat bar ( for lack of better name) and the bottom needs to have some space before the botton of the stake pocket so it can pull down snuggly on the rail, 1/16 should be fine.
So basically, set a troop seat side on the bed rail and measure down, adjust the 6 1/8 dimension accordingly. 2nd pic is from a M880 TM for ref.