Trunion felt

[USN_Green_Addict]

Where can I find a diagram of where the felt goes in the trunion?

 

[gringeltaube]

TM 9-2320-209-34P (December 1976), Section 16, Fig. 127

 

[USN_Green_Addict]

I appreciate the response. What would the easiest way to disassemble the the bearings and such? I'm trying not to take off the bolts, leaf pack or dog bones.

 

[gringeltaube]

Remove both U-bolts. Then loosen bolts #11 and separate (pry) the spring pack off of the spring seat. It should easily slide off, after removing the spindle nuts

 

[USN_Green_Addict]

Do I just need to put the jack stands under the trunion?

 

[gringeltaube]

Of course...! Axles will no longer carry the weight of the truck, once you pulled the U-bolts.

 

[NDT]

I left the springs attached. See post 100:

preventable rear suspension failure | Page 5 | SteelSoldiers